LPC2129 Header Board Features - MCU: 16/32-bit LPC2129 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, RTC, 4x 10-bit ADC 2.44 µS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
- Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM-JTAG
- 10 MHz crystal
- RESET button
- RESET circuit also can be controlled externally by Philips ISP utility via RS232
- JRST jumper for enabling external reset control by RS232
- Single power supply: 5V to 9V DC required
- Power supply LED and filtering capacitor
- DBG jumper for JTAG enabling
- BSL jumper for bootloader enabling
- Two-channel RS232 interface
- Two on-board voltage regulators 1.8V and 3.3V up to 800mA current
- PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
- Dimensions: 76 x 55 mm (3.0 x 2.2")
- Pin row spacing width: 48.26 mm (1.9")
LPC2129 Header Board Resources LPC2129 Header Board User Guide and Schematic OpenOCD + Eclipse set of projects 1.00 See the complete list of projects included here. This board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software. Ships from: USA
Leadtime: In stock
Optional Recommended Products for this Item
|
