TI AM4378 ARM Cortex-A9 processor, 1 GHz 512MB DDR3 SDRAM, 4GB eMMC Flash, 32KB EEPROM Gigabit Ethernet PHY Power Management IC Two 0.8mm-pitch 100-pin Board-to-Board expansion connectors Ready-to-run Linux 3.12.10 provided This is the CPU module that is included with the MYD-AM4378 development board. It contains a Texas Instruments Sitara AM4378 1GHz ARM Cortex-A9 processor, 512MB DDR3 SDRAM, 4GB eMMC, 32KB EEPROM, Gigabit Ethernet PHY and PMIC (TPS65218). There's also an unpopulated footprint for adding QSPI Flash. This module can connect to a main board through two 0.8mm-pitch 2×50-pin board-to-board connectors. The processor features 3D graphics acceleration for rich graphical user interfaces, PRU-ICSS for industrial protocols, a Vector Floating Point (VFP) unit and other peripheral and interface support like Quad-SPI, dual parallel cameras, two independent eight-channel ADCs, etc. This The MYC-C437X CPU module comes with a product disk which contains the detailed user manual, datasheet and Linux 3.12.10 software package. AM4378 CPU Module Features  - AM4378 Sitara ARM Cortex-A9 32-bit RISC processor operating at up to 1 GHz, with POWERVR SGX graphics accelerator, single-cycle vector floating point (VFP), dual camera and display processing subsystem, cryptographic acceleration and secure boot, and PRU-ICSS
- 512MB DDR3 SDRAM (2×256MB)
- 4GB eMMC Flash
- Footprint for adding a 16MB QSPI Flash (not populated)
- 32KB EEPROM
- Power Management IC (TPS65218B1RSLR)
- Gigabit Ethernet PHY
- Green user LED
- Dimensions: 60 × 45 mm, 8-layer PCB
- Power supply: 5V @ 2A
- Static power usage: About 5V @ 0.33A
- Operating temperature: 0 to 70 °C
- Two 0.8mm-pitch 100-pin board-to-board expansion connectors that carry the following interface signals:
• 2x USB
• 6x Serial ports
• 2x I2C
• 2x CAN
• 2x SPI
• 14x ADC (8 channels from ADC1 and 6 channels from ADC0)
• 3x SDIO AM4378 CPU Module Software A Linux software package is included with the board. Source code for all items listed below is included, except for the File System. | Category | Name | Description | | Boot program | SPL | First boot program | | U-boot | Secondary boot program | | Kernel | Linux 3.12.10 | Customized for MYD-C437x hardware | | Drivers | USB Host | USB Host driver | | USB Device | USB Device driver | | Ethernet | Gigabit Ethernet driver | | MMC/SD/TF | MMC/SD/TF driver | | NandFlash | NandFlash driver (board does not have NandFlash) | | eMMC | eMMC driver | | LCD Controller | LCD driver for 7-inch display module | | Touch | Touchscreen driver, supports resistive and capacitive screens | | HDMI | HDMI driver | | Button | Button driver | | UART | UART driver | | LED | LED driver | | GPIO | GPIO driver | | RTC | RTC driver | | Watchdog | Watchdog driver | | Camera | Camera driver | | CAN | CAN driver | | ADC | ADC driver | | PWM | PWM driver | | File System | Buildroot | Provided as tar package and ubi image file | AM4378 CPU Module Resources Ships from: China
Lead time: 1 week
|
