The XT-FEMTO-SXL is a very small embedded network module which can be integrated into any terminal. The module measures only 27 × 27 × 3 mm, and can be built into your system as an SMD or a THT component. A total of two bus systems with five switchable interfaces are available, such as RS232, RS485, I2C, SPI, and TTL-IO. By adding only a few additional components such as an RJ45 jack with an integrated transducer and a 3.3V power supply, your terminal will be immediately network compatible and can be accessed worldwide. Besides IPv4 and IPv6, the module supports SSL and TLS for encypted data transmissions. Using an M2M procedure you can connect to your terminal via a smartphone, tablet or PC without router configuration. An Evaluation Kit is available that features physical interface connectors and transceivers for 1x RS232, 1x RS485, a SPI connected LCD display, Power-over-Ethernet module, and an SD card socket. Serial-to-Ethernet Module Features Power supply
3.3V DC / ca. 170 mA
Dimensions
27 × 37 × 3 mm
Temperature Range
-40 to +85 °C
Ethernet (MDIX)
Ethernet 10/100Mbit
 2x RS232 (TTL)
Data rate : up to 2.5 MBaud
Data bits: 7-8 Bit
Parity: Odd, Even, Mark, Space, None
Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD, RI, GND
2x RS485 (TTL)
Data rate: up to 2.5 MBaud
Data bits: 7-8 Bit
Parity: Odd, Even, Mark, Space, None
Signals: TXD, RXD, RS485-RW
2x I2C (TTL)
Data rate: 100 KHz to 2.5 MHz
Data bits: 8 Bit
Master Mode
Signals: SLC, SDA
2x SPI (TTL)
Data rate: up to 25 MBit (Master)
Data bits: 8-16 Bit
Mode: Master/Slave
Signals: SCK, SS, MISO, MOSI
2x TTL-IO (TTL)
7/8-bit digital input/output
Supported protocols
IPv4, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, IPv6, NDP, ICMPv6, DHCPv6, TCPv6, UDPv6, Netbios-NS, LLMNR, ZeroConfig(AutoIP), IP-Multicast, AK-M2M, SSL 3.0, TLS1.0, TLS1.1, TLS1.2
Emulations and functions - Modem Emulation
- Connect-On-Data
- Auto-Connect
- Tunnel-Mode
- DYNDNS-Client
- FTP Server
- LPR Server
- I2C - Master
- SPI - Master / Slave
- TTL - IO
- 512KB Flashdrive
- Flash-File-System
- SD and TF card
- 4-bit and SPI display
- E-Mail Client
- TCP/UDP Client
- TCP/UDP Server
- SYSLOG Client
- M2M
Serial-to-Ethernet Module Resources
|
