This is a 15.55-inch LCD with an interface board that provides three different connection options: a 2×20-pin 0.1"-pitch header and two 2×20-pin 0.05"-pitch headers with different pin arrangements. These interfaces make this display compatible with all of the A20-OLinuXino series of boards.
For regular OLinuXino boards, you'll use the 0.1"-pitch header and will need the CABLE-IDC40-15cm ribbon cable to connect.
For OLinuXino boards designated LIME or LIME2, you will use one of the 0.05"-pitch headers (one is for original LIME boards; one is for LIME2 boards) and will need the CABLE-40-40-10CM ribbon cable to connect.
Note that this display does not have a touchscreen.
Not recommended for A13 or A10 boards Technically the connections are compatible with A13- and A10-OLinuXino boards as well, but those CPUs don't have the processing power to run this display smoothly.
OLinuXino LCD Board Features
- 15.6" (actually 15.55") display
- Full HD 16:9 color TFT LCD with LED backlight
- 1920×1080-pixel resolution
- Three interfaces for connection to A20-OLinuXino boards, including LIME2
- 5V power must be provided from external supply via jack (can not be powered from the host system)
- 3.5W consumption
- Suitable for Linux and Android video output
NOTE: The input through the power jack must be a regulated 5V DC supply. It is a 2.5mm barrel connector, positive inner. You can use the MIKROE-192 voltage regulator/rectifier board and the PWR-CABLE adapter for an easy, solderless solution if you don't have a regulated 5V supply available.
Setting Up the Display Please check the user manual and/or Wiki page of your OLinuXino board for instructions about configuring it to use this display. Depending on which board and OS you're using, you may have to download a specific OS image, a specific script file, or simply run a configuration command. Some board/OS combinations may not support this display.