Texas Instruments AM3358 Sitara 1GHz ARM Cortex-A8 CPU 256MB DDR3 SDRAM, 256MB Nand Flash Serial ports, USB Host, USG OTG, CAN, RS485, microSD, LCD interface, Audio, 2x Gigabit Ethernet, WiFi Optional 4.3" (480×272) touchscreen LCD available Ready-to-run Linux development platform Supports -40 to +85 °C operation (range does not apply to optional LCD) The MYD-AM3358-Y is a high-performance ARM development board with a 1GHz Texas Instruments Sitara AM3358BZCZA100 ARM Cortex-A8 Microprocessor that produces high DMIPS at a low cost while also delivering key peripherals. The MYD-AM3358-Y comes with Linux pre-installed, as well as a WiFi module. The AM3358 CPU includes a 3D graphics accelerator and PRU-ICSS which is used for slave industrial communication protocols like PROFIBUS, PROFINET, Powerlink and Ethernet/IP. The system is constructed of a motherboard plus a core board that is soldered on top. As well as the CPU itself, the core board contains a Gigabit Ethernet PHY, 256MB NAND Flash, 256MB DDR3 SDRAM, 32Kb EEPROM, and a power management IC. The base board provides many peripheral interfaces and extended controller chips. These include a Debug port, USB Host port, USB OTG port, dual Gigabit Ethernet ports, one CAN, one RS485, one microSD, Audio in/out, Buzzer, WiFi, LCD, Touchscreen, JTAG, and other peripheral signals on two 20-pin extension interfaces. The board comes with a Linux 3.2.0 software package, detailed documentation, and all necessary cables. At the bottom of this page, you can add an optional LCD touchscreen. AM3358 Development Board Features  - TI AM3358BZCZA100 Sitara 1GHz ARM Cortex-A8 32-bit RISC MPU with NEON SIMD co-processor, 32KB/32KB L1 Instruction Cache, 256KB L2 Cache, SGX530 Graphics Engine, Programmable Real-Time Unit Subsystem
- 256MB DDR3 SDRAM and 256 NAND Flash
- Gigabit Ethernet PHY
- Red Power LED and Green User LED
- TPS65217C power management IC
- 3-wire RS232 Debug Serial Port, DB9
- RS485 interface, with isolation
- USB2.0 Host Ports
- USB2.0 OTG Port
- Two 10/100/1000Mbps Ethernet Interfaces, RJ45
- CAN Bus interface, with isolation
- microSD (TF) Card Slot
- LCD Interface (16-bit true color)
- 4-wire Resistive Touch Screen Interface
- Audio Input Port, 3.5mm jack
- Stereo Audio Output port, 3.5mm jack
- Buzzer
 - 2.0mm-pitch 10-pin JTAG interface
- Four Buttons (2 User, 1 Reset, 1 Power)
- Two 2mm-pitch 2×10-pin Expansion Headers (3x ADC, 1x DCAN, 2x I2C, 1x UART)
- Power Requirements: 5V @ 2A
- Dimensions: 90 × 118 mm
- 4-layer PCB main board; 10-layer PCB CPU module
AM335x Development Board Linux Software | Item | Features | Description | Bootstrap
Program | SPL | Primary bootstrap (with source code) | | u-boot | Secondary bootstrap (with source code) | | Kernel | Version | Linux 3.2.0, customized (with source code) | | Drivers | USB Host
USB Device
USB OTG | USB Host/Device/OTG driver (with source code) | | Ethernet | Gigabit Ethernet driver (with source code) | | MMC/SD/TF | MMC/SD/TF card driver (with source code) | | NandFlash | NandFlash driver (with source code) | | CAN | CAN driver (with source code) | | RS485 | RS485 driver (with source code) | | Audio | Audio driver (with source code) | | LCD Controller | LCD driver, supports 4.3-inch TFT LCD (with source code) | | RTC | RTC driver (with source code) | | Touch driver | Resistive Touch driver (with source code)
Capacitive Touch driver (KO driver file) | | Button | Button driver (with source code) | | UART | UART driver (with source code) | | LED | LED driver (with source code) | | GPIO | GPIO driver (with source code) | | WatchDog | Watchdog driver (with source code) | | File System | Buildroot | Provided in tarball and ubi image file | AM3358 Development Board Package Contents - MYD-AM3358-Y Board (with MCC-AM3358-Y Module installed)
- 5V, 2A Power Adapter
- Ethernet cable
- USB cable
- DVD-ROM with schematic, user manual, BSPs and source code
AM3358 Development Board Resources Ships from: China
Lead time: 1 week The LCD Display option below allows you to add a 4.3-inch (480×272) LCD touchscreen to your order. Note that the LCD module has a more limited operating temperature range of -20 to +70 °C.
Available Options:
| LCD Display: |
|
|
