
Atmel SAMA5D36 ARM Cortex-A5 processor, 536 MHz 256MB Nand Flash, 4MB DataFlash, 512MB DDR2 SDRAM, 16MB Nor Flash HDMI, Ethernet, CAN, USB Host/OTG, UART, RS485, Audio Linux 3.6.9, Android 4.0.4 The MYD-SAMA5D36 development board contains a CPU module with an Atmel SAMA5D36 ARM Cortex-A5 processor running at 536 MHz. This is a full-function evaluation kit with rich peripheral interfaces and includes Linux 3.6.9 and Android operating systems with source code. The board features 512MB DDR2 SDRAM, 256MB NandFlash, 4MB DataFlash and 16MB NorFlash memory. The on-board interfaces include HDMI, SD Card, UART, CAN, USB Host/OTG, RS485, Ethernet (two ports), etc. The MYD-SAMA5D35 board can run Linux and Android, and is delivered with full peripheral driver source code so that you can evaluate the SAMA9D36 processor and quickly develop your own applications. The MYD-SAMA5D36 development board is provided with detailed schematic documents, datasheet, user manual and fully developed Linux and Android BSP. These allow you to evaluate, customize, and develop hardware and software to cover many fields such as HDMI applications, consumer electronics, video processors, industrial control, display systems, security devices, electric power control systems, and web terminals. Note: By the manufacturer's own admission, Android does not perform very well on this board. Best performance will be achieved under Linux. The MYC-SAMA5D36 CPU module plugs in via an SODIMM200 connector, and can be replaced by other modules so you can evaluate the different processors in the Atmel SAMA5D3x series. The differences between the five available processors is as follows: Feature | SAMA5D31 | SAMA5D33 | SAMA5D34 | SAMA5D35 | SAMA5D36 | LCD/HDMI Controller | Yes | Yes | Yes | No | Yes | Ethernet | 10/100 | Gigabit | Gigabit | Gigabit | Gigabit | 2nd Ethernet | No | No | No | 10/100 | 10/100 | CAN Buses | None | None | 2 | 2 | 2 | HSMCI Buses | 3 | 2 | 3 | 3 | 3 | Extra UARTs* | 2 | None | None | 2 | 2 | Timer/Counters | 1 | 1 | 1 | 2 | 2 | * All five CPUs have three 5-line USARTs and a 3-line DBGU (Debug UART). The SAMA5D31, SAMA5D35 and SAMA5D36 add two 3-line UARTs (i.e. asynchronous only). See Atmel's SAMA5D36 Page for the datasheet and other documentation. SAMA5D36 Development Board Features - SAMA5D36 ARM Cortex-A5 processor operating at up to 536 MHz (850 DMIPS), with 32KB Data Cache, 32KB Instruction Cache, Virtual Memory System Architecture (VMSA), fully integrated MMU and Floating Point Unit (VFPv4)
- CPU has one 160KB Internal ROM (single-cycle access at system speed) with embedded bootloader (boot on NAND Flash, SDCard, eMMC, serial DataFlash, selectable order), and one 128KB Internal SRAM (single-cycle access at system speed)
- CPU module board includes 256MB NandFlash, 4MB DataFlash, 16MB NorFlash, and 512MB DDR2 SDRAM
- Main board size: 154 × 110 mm, 4-layer PCB
- Power supply: 5V @ 2A (CPU module receives 3.3V via SODIMM200)
- Debug interface: 20-pin, 2.54mm standard JTAG
- Operating Temperature: 0 to 70 °C (industrial range of -40 to +85 °C is available for large orders; contact us with your requirements)
- TFT LCD interface and 4-wire touchscreen interface
- HDMI connector (driver provided, but no source code)
- MMC/SD card slot
- TF card slot (microSD)
- 3-line RS232 Debug Serial port (DB9)
- 5-line RS232 Serial port UART1 (DB9)
- RS485 interface UART2 (10-pin 3.5mm-pitch terminal block)
- 2x CAN interfaces
- 2x High-Speed USB Host
- mini-USB OTG interface
- 2x Ethernet RJ45 jacks
- 3.5mm audio jacks — one input, one stereo output
- On-board electret microphone
- Camera interface (no driver provided)
- Telephone jack (no driver provided)
- Battery holder for RTC backup
- Red power LEDs on both main board and CPU module, plus a blue user/system tick LED
- Two system buttons and two user buttons
- 2x SPI, 2x I2C, 1x PWM, 4x ADC, and 41x GPIO available on extension headers (some multiplexed)
SAMA5D36 Development Board Software Linux source code Content | Name | Description | Boot code | AT91 Bootstrap | First boot code | u-boot | Secondary boot program | Boot Mode | Boot Linux from NAND Flash | Image update | Supports loading kernel image to NAND Flash via USB | File system update | Supports loading file system image to NAND Flash via USB | Linux internal | Linux 3.6.9 | Linux kernel for MYD-SAMA5D3x | File system | Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS | Device drivers | USB Host | USB Host driver, supports OHCI and EHCI mode | USB Device | USB Device (Base Gadget) | GigaEthernet | Cadence GEM Giga Ethernet driver | Ethernet | 10/100Mbps Ethernet driver | MMC / SD | MMC/SD driver | NandFlash | NandFlash/Smart Media driver | TWI (I2C) | I2C driver | SPI | SPI driver | WM8904 | WM8904 audio driver | LCD Controller | LCD driver, supports 4.3", 7.0" | Touch Screen | 4-wire Resistive Touch Screen driver | RTC | RTC clock driver | HDMI | HDMI driver (source code not provided) | PWM | PWM driver | USART | Serial port driver | LED | GPIO LED and PWM LED driver | File system | QT | X11 File system with desktop UI | Android source code Content | Name | Description | Boot code | AT91 Bootstrap | Use to load Uboot | Uboot | Supports NandFlash read/write/erase Supports downloading image via Ethernet Supports configuration Supports memory display, compare and modify Supports bootm, bootargs setting | Linux internal | Linux 3.6.9 | Linux kernel for MYD-SAMA5D3x | Device drivers | Ethernet | ETH0, Ethernet driver | LCD+Touch | LCD and touch panel driver | USB | 2x USB Host, USB-OTG | MMC/SD | MicroSD driver | UART | USART1, DBGU driver | GPIO | GPIO driver | File system | Android file system | Android 4.0.4 | SAMA5D36 Development Board Package Contents - MYD-SAMA5D3 main board with MYC-SAMA5D36 CPU module
- Ethernet cable
- mini-USB cable
- Serial port cable
- 5V/2A power adapter
- DVD-ROM with schematic, user manual, BSPs and source code
SAMA5D36 Development Board Resources Ships from: China Lead time: 1 week The selector and checkboxes below allow you to add an LCD touchscreen to your order, to order extra or alternative CPU modules, and to order optional peripheral modules.
Available Options:
LCD Display: |
|
Optional Recommended Products for this Item
|
| SAMA5D33 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 512MB DDR2 | | + | US$95.00 | | SAMA5D34 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 512MB DDR2 | | + | US$95.00 | | SAMA5D34 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 256MB DDR2 | | + | US$85.00 | | SAMA5D35 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 512MB DDR2 | | + | US$95.00 | | SAMA5D35 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 256MB DDR2 | | + | US$85.00 | | SAMA5D36 CPU Board, SO-DIMM200, 256MB NAND, 16MB NOR, 512MB DDR2 | | + | US$95.00 | | USB 2.0 Digital Camera Module, 1.3 Megapixel, Up to 1280x1024 | | + | US$29.00 | | USB 2.0 WiFi Module, 802.11b/g/n, Up to 150Mbps | | + | US$25.00 | | GPS Add-on Module, 2x10-pin 2mm Pitch F, u-blox MAX-7 Multi-GNSS | | + | US$49.00 |
| |