You can integrate two RS232 or RS485 devices into a wireless network easily and comfortably using the AK-DinRail-XXR. Each of the two RS485 screw terminals and two RS232 DB9M interfaces can be configured independently, and allow for data rates up to 230Kbps with the included external antenna. A third screw terminal interface is for power input of 7V to 32V (2.2W). The integrated Wireless LAN includes all necessary protocols such as IEEE802.11b, IEEE802.11g as well as IEEE802.11n (Draft 3.0). Furthermore, all required and modern security functions such as WEP 64/128-bit, WPA1 and WPA2-Personal are integrated. The AK-DinRail-XXR can be mounted on a 35mm top hat / DIN rail EN 60715 (50022). It has a width of only 35 mm. Note: The RS232 and RS485 connections use shared ports. This is a two-port device server. You can use both DB9M for RS232, or both screw terminals for RS485, or one of each. It is possible to set emulations such as modems, Auto-Connect, Conntect-On-Data, TCP/UDP Client, TCP/UDP Servers, Tunnel Mode with transfer of signal statuses such as settings, and E-mail Client including sending and receiving of e-mails. Furthermore, an SD card holder is available internally which allows you to save your own homepage or Java applets. The AK-DinRail-XXR functionally is the same as the AK-RailPort-XXR; it just has a different form. This DinRail series has a slim profile, putting the connections one behind the other to take up minimal rail space. The RailPort series has a more traditional profile, putting the connections side by side along the rail. Unlike the DinRail series, the RailPort series does not have a cover over the SD card slot and DIP switches. RS232/RS485 Device Server Features  | Technical Data | | Dimensions | 120 × 101 × 35 mm | | Temperature range | -10°C to +65°C | | Certifications | CE / WEEE / RoHS
EN 55022 Class B
EN 55024 Class A | | Protection | IP30 | | Power supply | 7-32V / 2.2W
(e.g. 12V = 180mA) | | Mounting | 35mm top hat / DIN rail
DIN EN 60715 (50022) | | Ethernet | 1x Ethernet 10/100Mbit (M-DIX) RJ45
Half/full-duplex, auto-sensing | | WLAN | 1T1R | | RS485 | 2x removable 5.08mm screw terminal strips with threaded terminal ends
Baud rate up to 230Kbaud
7/8 Data Bits
Odd/Even/None/Mark/Space Parity
TXD, RXD, GND signals
External DIP switches for termination, pull-up, pull-down | | RS232 | 2x DB9M Sub-D connectors
Baud rate up to 230Kbaud
7/8 Data Bits
Odd/Even/None/Mark/Space Parity
TXD, RXD, RTS, CTS, DSR, DTR, DCD, RI, GND signals | | Supported OS | Windows 7 (32/64)
Windows Vista (32/64)
Windows 2003
Windows 2000
Windows XP (32/64)
Windows NT 4.0
Windows ME
Windows 98
Windows 95
Linux
UNIX | | Supported protocols | IPv4, IPv6, TCPv4, TCPv6, UDPv4, UDPv6, FTP, TFTP, ICMPv4, ICMPv6, ARP, NDP, SNMP, LPR, DHCPv4, DHCPv6, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, NetBios-NS, LLMNR, ZeroConfig (APIPA/AutoIP), IP-Multicast | | Emulations | Modem Emulation, Connect-On-Data, Auto-Connect, Tunnel Mode, DYNDNS Client, FTP Server, LPR Server, TTL – IO, 2MB Flash Drive, Flash File System, SD and DF Card, E-Mail Client, TCP/UDP Client, TCP/UDP Server, SYSLOG Client | | Functions | ADHOC / INFRA Mode
Fast-Roaming
AutoConnect with Wi-Fi Protected Setup (WPS-PBC)
Hardware WEP, TKIP, AES Engine
WEP 64-bit and 128-bit up to 4 keys | | IEEE802.11b | 1, 2, 5.5, 11 Mbps | | IEEE802.11g | 6, 9, 12, 24, 36, 48, 54 Mbps | | IEEE802.11n | (Draft 3.0) up to 150 Mbps
Legacy, mixed and green field modes
Supports 20/40MHz bandwidth MCS0-7 (150Mbps PHY rate support) | | IEEE 802.11d | World Mode (US, CA, EU, JP) | | IEEE802.11e | Wi-Fi WMM-QoS "Quality of Service"
Wi-Fi WMM-PS "Power Save" | | IEEE802.11h | DFS (Dynamic Frequency Selection)
TPC (Transmission Power Control) | | IEEE 802.11i | WPA1- and WPA2-Personal | | IEEE802.11j | Operation in Japan | RS232/RS485 Device Server Resources Lead time: 1 week
|
