Connect RS232 or RS485 devices to your wireless network Using the ComPoint-WLAN-XXR you can integrate two serial terminal devices into a network by a wireless connection. This WLAN device server offers two RS232 or RS485 interfaces, WLAN and Ethernet 10/100, and is equipped with all necessary connections. The integrated Wireless LAN offers all necessary protocols such as IEEE802.11b, IEEE802.11g as well as IEEE802.11n (Draft 3.0) to allow you an easy and simple integration. In addition, all necessary and state-of-the-art security functions such as WEP 64/128-bit, WPA1 and WPA2 Personal have been integrated, thus offering you the highest security standard. The device is equipped with an external antenna and offers maximum 150MBps speed. Its flexibility and diversity are complemented by the various additional functions and emulations of the AK-NORD TCP/IP-STACK as well as by the robust metal housing. Using this device server, it is easy and straightforward to connect your serial devices directly to your wireless LAN. It is possible to connect virtually any serial terminals which utilize serial RS232, V24, RS485 or RS422 connection to a workstation via the network. The device server provides all necessary network protocols such as TCP/IP, UDP, FTP, SNMP, Telnet, ICMP, DHCP, DNS, DDNS, ARP, BOOTP, HTTP as well as DynDNS; therefore it is independent from the operating system. By using the free AK-VirtualCom COM port redirector software, it is possible to connect the networked terminals to an existing application. Versatile functions such as Modem emulation, PAD emulation, ConnectOnData, AutoConnect and DynDNS are available on the device server. A power supply is included. RS232/RS485 Serial Device Server Features - Power supply: 5V @ 380mA (switchable to pin 9 of serial interfaces via internal jumpers)
- Ethernet 10/100Mbit RJ45 connection, MDIX, half/full duplex, auto-sensing
- 1T1R WLAN
- Internal SD Card slot (for up to 4GB, FAT16, PC-compatible)
- RS232/RS485 up to 230KBaud, 7/8 Data Bits, Odd/Even/None/Mark/Space Parity
- RS232 pins: TXD, RXD, RTS, CTS, DSR, DTR, DCD, RI, GND
- RS485 pins: TXD, RXD, GND
- Internal jumpers for RS485 termination and pull-up/pull-down
- Protocols: IPv4, IPv6, TCPv4, TCPv6, UDPv4, UDPv6, FTP, TFTP, ICMPv4, ICMPv6, ARP, NDP, SNMP, LPR, DHCPv4, DHCPv6, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, NetBios-NS, LLMNR, ZeroConfig (APIPA/AutoIP), IP-Multicast
- Temperature range: -10° to +65° C
- CE / WEEE / RoHS; DIN EN 55022 class B; DIN EN 55024 class A
- Dimensions: 100 × 28 × 110 mm
Functions | ADHOC / INFRA Mode Fast-Roaming AutoConnect with Wi-Fi Protected Setup (WPS-PBC) Hardware WEP, TKIP, AES Engine WEP 64-bit and 128-bit up to 4 keys | IEEE 802.11b | 1, 2, 5.5, 11 Mbps | IEEE 802.11g | 6, 9, 12, 24, 36, 48, 54 Mbps | IEEE 802.11n | (Draft 3.0) up to 150 Mbps Legacy, mixed and green field modes Supports 20/40MHz bandwidth MCS0-7 (150Mbps PHY rate support) | IEEE 802.11d | World Mode (US, CA, EU, JP) | IEEE 802.11e | Wi-Fi WMM-QoS "Quality of Service" Wi-Fi WMM-PS "Power Save" | IEEE 802.11h | DFS (Dynamic Frequency Selection) TPC (Transmission Power Control) | IEEE 802.11i | WPA1- and WPA2-Personal | IEEE 802.11j | Operation in Japan | Emulations and Functions - Modem Emulation
- Connect-On-Data
- Auto-Connect
- Tunnel Mode
- DYNDNS Client
- FTP Server
- LPR Server
- TTL – IO
- 2MB Flashdrive
- Flash File System
- SD and DF Card
- E-Mail Client
- TCP/UDP Client
- TCP/UDP Server
- SYSLOG Client
Supported Operating Systems - Microsoft Windows 7
- Microsoft Windows Vista
- Microsoft Windows 2003
- Microsoft Windows 2000
- Microsoft Windows XP
- Microsoft Windows NT 4.0
- Microsoft Windows ME
- Microsoft Windows 98
- Microsoft Windows 95
- Linux
- UNIX
RS232/RS485 Serial Device Server Resources Lead time: 1 week
|