Atmel SAM9G45 ARM9 processor, 400 MHz 256MB Nand Flash, 4MB DataFlash, 2×64MB DDR2 SDRAM, 64KB EEPROM Ethernet, USB Host/OTG, UART, RS485, Audio Ships with Linux 2.6.30, Android 2.3.1, and example code for Keil MDK Optional 4.3" or 7" touchscreen LCD available The MYS-SAM9G45 is a single-board computer with an Atmel AT91SAM9G45 ARM9 processor running at 400 MHz. The board includes 128MB DDR SDRAM, 256MB Nand Flash, 4MB Data Flash, and 64KB EEPROM, and includes interfaces for USB Host, USB OTG, Ethernet, LCD module, RS485, SPI, etc. The board supports Linux and Android operating systems, and is provided with full peripheral driver source code to help you develop your own applications. The MYS-SAM9G45 SBC is provided with detailed schematics, user manual, datasheet and fully developed Linux and Android BSP. It is ready to be deployed in various fields including consumer appliances, printers, video processors, industrial control, display systems, security devices, electric power control systems, PDA devices, and web terminals. See the Atmel SAM9G45 Page for a datasheet and other documentation on the CPU. SAM9G45 Single-Board Computer Features  - SAM9G45 ARM926EJ-S 32-bit RISC processor operating at up to 400 MHz, with 16KB Data Cache, 16KB Instruction Cache, and MMU
- CPU has 64KB SRAM and 64KB EEPROM
- SBC includes 256MB NandFlash, 4MB DataFlash, 2×64MB DDR2 SDRAM
- Board size: 100 × 64 mm, 8-layer PCB
- Power supply: 5V @ 2A
- Debug interface: 20-pin, 2.54mm standard JTAG
- Operating Temperature: 0 to 70 °C
- COM port, supports RS232
- Ethernet port with RJ45 jack, 100Mbps, DM9161AEP PHY
- USB Host jack
- mini-USB OTG jack
- 3.5mm audio jacks — one input; one stereo output
- microSD card slot
- 24-bit RGB TFT LCD interface, 480×272 to 1280×860
- Battery holder for RTC backup
- Reset button and user button
- Extension headers
Download MYS-SAM9G45 Board Schematic SAM9G45 Single Board Computer Software Linux source code | Content | Name | Description | | Bootloader | AT91 Bootstrap | Guide u-boot | | u-boot | u-boot 1.3.4 | Function:
1. Nand Flash erase/read/write
2. Supports downloading image over network
3. Configure, save settings
4. Supports bootm, bootargs setting | | Linux internal | Linux 2.6.x | ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS | Kernel and
Device Drivers | System clock | System frequency: 400 MHz | | Display driver | Supports 4.3" LCD | | Touchscreen | Touch screen driver | | Ethernet | DM9000 Ethernet driver | | HSMMC | SD/MMC/SDIO driver | | NAND Flash | NAND Flash driver | | Serial | COM driver | | USB Host | Supports USB keyboard, mouse, U disk | | DMA | DMA driver | | SPI | SPI driver | | IIC | I2C driver | | USB Device | USB Device driver | | File System | Supports jffs2 file system | | Cross compiler | arm-none-linux-gnueabi | Cross-compile tool chain | | PC software | SAM-BA 1.13+USB | Downloads kernel into NAND Flash via USB | Android source code | Name | Description | | Kernel | Android 2.3.1 | | Drivers | SD Card load
USB keyboard
Audio
Ethernet/WiFi
LCD/Touchscreen | Source code for Keil MDK | Name | Description | | NandFlash | NAND Flash operation | | fatfs | File system operation | | filesystem | Implementation of open-source FAT file system | | dataflash | SPI with Data Flash | | twi-eeprom | Access to EEPROM via TWI | | rtt | Timer | | rtc | Real-time clock | SAM9G45 Single-Board Computer Package Contents - MYS-SAM9G45 SBC
- Ethernet cable
- mini-USB cable
- Serial port cable
- DVD-ROM with schematic, user manual, BSPs and source code
SAM9G45 Single-Board Computer Resources Ships from: China
Lead time: 1 week The options below allow you to add an LCD touchscreen to your order. The picture below shows a 4.3-inch LCD. 
Available Options:
| LCD Display: |
|
|
