Use SMT parts on breadboards without the need for expert soldering skills! This is a pack of 10 boards each of which is a strip of six SOIC-to-DIP adapters with a twist. These have the patented Schmartboard|ez technology to make soldering surface-mount devices easy. Your SMT part will sit in grooves that hold it in place and already have solder in them. So all you need to do is put a chip in the grooves, apply flux, and use a small enough soldering tip. The 10 PCBs can be snapped apart easily, creating 60 individual boards: - Qty 20 boards for up to 8-pin SOT23 at 0.95mm pitch
- Qty 20 boards for up to 6-pin SOT323, SOT353, or SOT363 at 0.65mm pitch
- Qty 20 boards for up to 6-pin SC70 at 0.65mm pitch
Ten strips of 40 male pin headers each are included. These strips also can be snapped apart so that you can create the individual 3- and 4-pin segments needed when these boards have been separated. You can order additional pin headers using the option box at the bottom of this page.  Also available in single quantity (i.e. two of each adapter).
Optional Recommended Products for this Item
|
