The Eddy Memory module is the ideal choice for applications with large memory storage requirements. It is equipped with an SDIO and a USB host port, allowing you to select your preferred storage medium and capacity. Data gathered and accumulated from serial devices can be saved and backed up to be sent over Ethernet. It also can serve as an ideal backup storage solution in case of Ethernet communication failure. Aside from memory expansion, various devices can be hooked up to the USB host port, making this module a feasible solution for embedded applications including surveillance systems, building automation systems, POS systems, industrial automation systems and many more. Like all other Eddy modules, this module contains a powerful Eddy-CPU module which incorporates an ARM9 (180 MHz) processor, 4MB Flash and 32MB SDRAM which is run by a stable real-time Linux OS, Lemonix. Embedded Serial/USB/Memory Module Features - 32-bit ARM9 CPU / 8MB NOR FLASH / 32MB SDRAM
- 2 Serial Pin Header Interfaces (Serial, Power)
- 10/100 Ethernet PHY (Auto MDIX)
- USB 2.0 Full Speed (12 Mbps) Host Port
- SDcard/SDIO/MultiMedia Card Interface
- Supported by Dev Kit including SDK, API
- Operated by Embedded Linux
- Supported by Eclipse-based IDE LemonIDE
- Easy-to-use Windows utilities: COM Port Redirector, PortView, TestView
- Watchdog timer support
- Operating Temperature: -40 to 85 °C
Lemonix, Real-Time Linux Lemonix is a real-time Linux built on Linux kernel 2.6.x. The standard Linux kernel 2.6.x has been revised to support real-time capability while retaining the stable traits and merits of Linux kernel 2.6.x. Real-time scheduler, pre-emptive kernel and lock-break methods have been implemented on Lemonix to guarantee a maximum response latency of under 37 µs enabling a stable and reliable means of real-time communication. SDK, API & Source Codes Support Eddy is distinguished with other embedded device servers in that it can upload and execute customized user applications. To enable developers to program their own socket/serial communication applications with the least amount of time and effort, SystemBase provides a range of development support including SDK (Software Development Kit), API (Application Programming Interface) and Source Codes to assist development. LemonIDE, Eclipse-based IDE LemonIDE is an integrated development environment built on the open-source Eclipse framework. LemonIDE provides an easy and effective GUI for application and firmware development that runs on Lemonix. LemonIDE encompasses a GNU C/C++ Compiler, Source Code Editor and Debugger, delivering a one-stop development environment solution to embedded developers with the convenience of simple mouse-click execution. Development Kit Available The Eddy Development Kit provides an easy testing and evaluation environment for Eddy applications. Before integrating Eddy to your hardware, applications can be programmed and tested on the development board. Power, Ready, Communication Interface, and GPIO Serial Signal Status LEDs on the development board provide a visual guide to understanding Eddy's operating status. Embedded Serial/USB/Memory Module Specifications | Hardware | | CPU | ARM926EJ-S (210 MHz) | | Memory | 8MB NOR Flash, 32 MB SDRAM | | LED | Ready, Serial TX, RX | | Power Input | 5V Pin Input or 5V Power Jack | | GPIO | 4 | | Power Consumption | 5V / 290mA (1.5W Max) | | Dimensions | 60 × 80 × 19 mm | | Weight | 44.5 g | | Software | | O/S | Embedded Linux | | Management Tools | SNMP, Web, PortView | | Terminal | Telnet, SSH | | Application Uploads | TFTP, FTP, Web | | Development Tools | LemonIDE and SDK | | Serial | | Interface | RS232 or RS422/485
(Choose option below) | | Port | Pin header | | Speed | 150 to 921.6 Kbps | | Signals | COM1: Full signals
COM2: TX, RX, CTS, RTS | | Data Bits | 5, 6, 7, 8 | | Stop Bits | 1, 2 | | Parity | None, Even, Odd | | Flow Control | RTS/CTS, Xon/Xoff | | USB Host | | USB2.0 Full Speed (12 Mbps), Host Single Port | | On-chip Transceiver | | Integrated FIFOs and Dedicated DMA channel | | MCI | | SDcard / SDIO and MultiMediaCard compliant | MultiMediaCard (MMC) Specification V3.11
SD Memory Card specification V1.0 support | | Network | | Protocol | TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP,
SNMP 1 & 2, SSH, SSL/TLS | | Ethernet Interface | 10/100 Base-T (Auto MDI/MDI-X) | | Ethernet Port | 1x RJ45 | | Network Connection | Static IP, DHCP | | Environmental | | Operating Temperature | -20 to +85 ˚C | | Storage Temperature | -60 to +150 ˚C | | Humidity | 5% to 95% Non-Condensing | | Approvals | | CE Class A, FCC Class A, RoHS | Embedded Serial/USB/Memory Module Resources
Available Options:
| Interface: |
|
Optional Recommended Products for this Item
|
| Power Supply 3-12V DC, U.S. plug, 6 connection tips | | + | US$11.00 | | Power Supply 3-12V DC, US/UK/Euro/AU Plugs, 100-240VAC | | + | US$13.00 | | Ethernet Cable, CAT5E 350MHz Unshielded, 7ft. | | + | US$3.60 | | Ethernet Crossover Cable, CAT5E 350MHz Unshielded, 5ft. | | + | US$7.00 | | USB 2.0 Cable, 6ft., A-Male / B-Male | | + | US$6.00 |
|
|
