This board plugs into the NETUS G20 ARM9 CPU module, either by itself or on the FOX Board G20 Embedded Linux System. It provides eight IDC10 connectors (1.27mm pitch) to which you can attach Daisy System peripheral boards via 10-pin ribbon cables. This board is required in order to use Daisy peripherals with the FOX Board G20. This board is not required to use Daisy peripherals with the Terra Board G25 or the obsolete BeeBoard (unless you want the Bee to be a co-processor on the Fox). Daisy System Example  Pinout of DAISY-1 IDC10 Connectors | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | | Pin | ttyS2 | GPIO1/ttyS5 | GPIO/ttyS1 | ADC | GPIO2/ttyS6 | ttyS4 | SPI01 | ttyS3 | | 1 | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | 3.3V | | 2 | TXD (PB6) | PA31 (ID63-TXD) | TXD (PB4) | AVDD | PB12 (ID76-TXD) | TXD (PB10) | MOSI (PB1) | TXD2 (PB8) | | 3 | RXD (PB7) | PA30 (ID62-RXD) | RXD (PB5) | VREF | PB13 (ID77-RXD) | RXD (PB11) | MISO (PB0) | RXD2 (PB9) | | 4 | RTS (PB28) | PA29 (ID61) | RTS (PB26) | AGND | PB16 (ID80) | RTS (PC8) | CK (PB2) | | | 5 | CTS (PB29) | PA28 (ID60) | CTS (PB27) | AD0 (PC0) | PB17 (ID81) | CTS (PC10) | NPCS0 (PB3) | | | 6 | | PA27 (ID59) | DSR (PB22) | AD1 (PC1) | PB18 (ID82) | PB31 (ID95) | NPCS1 (PC5) | | | 7 | TWD (PA23) | PA26 (ID58) | DTR (PB24) | AD2 (PC2) | PB19 (ID83) | TWD (PA23) | NPCS2 (PC4) | TWD (PA23) | | 8 | TWCK (PA24) | PA25 (ID57) | RI (PB25) | AD3 (PC3) | PB20 (ID84) | TWCK (PA24) | NPCS3 (PC3) | TWCK (PA24) | | 9 | 5V | PB30 (ID94) | CD (PB23) | 5V | PB21 (ID85) | 5V | 5V | 5V | | 10 | GND | GND | GND | GND | GND | GND | GND | GND | Download DAISY-1 Schematic (PDF) Download DAISY-1 Mechanical Drawing (DWG)
Optional Recommended Products for this Item
|
