The MINI-AT is a small module with an ATmega328 AVR microcontroller which comes with an open-source AVRdude bootloader installed so that you can program the device through USB without the need for any additional hardware. A reset button and indicator LEDs also are on board. You can get this board as a 3.3V unit with an 8 MHz crystal, or as a 5V unit with a 16 MHz crystal. Use the option selector below to choose which voltage you require. Based on your selection, the part number on your invoice will change to MIKROE-672 or MIKROE-671. The MCU pins are available on pads, and the board ships with header pins that you can solder on which will put this module into a 26-pin DIP form (2.54mm/0.1" pin spacing) that you can drop into a system easily. With 32kB of Flash and 2kB of RAM, this board can be the brains of your mobile devices, robots, autonomous vehicles, etc. The board gets power through USB, through the VCC-IN pin (3.3V/5V to 16V), or through the VCC pin (3.3V/5V only). The VCC pin also can supply external devices with 3.3V or 5V depending on which board you have. Dimensions: 33 mm × 17.78 mm.
Available Options:
|