This JEDEC MO-224 format module allows you to add an Atmel AT91SAM9G45 CPU to your design via a 200-pin SO-DIMM card connector. The module measures 67 × 35.5 mm. AT91SAM9G45 CPU Module Features - MCU: AT91SAM9G45, 400 MHz ARM926EJ-STM ARM Thumb processor
- 128MB DDR2 SDRAM, 16-bit
- 256 MB NAND Flash
- 4 MB Atmel Serial DataFlash
- 10/100 MBit/s Ethernet
- DS2401 serial number chip
- SO-DIMM 200 JEDEC MO-224 module (67×35.5mm)
 AT91SAM9G45 CPU Features - 400 MHz ARM926EJ-S
- DSP Instruction Extensions
- ARM Jazelle Technology
- 32 KB Data Cache
- 32 KB Instruction Cache
- Memory Management Unit
- Dual External Bus Interface
- DMA Controller
- DDR2 Interface
- AC97 Interface
- Embedded ICE
- 128 KB Internal ROM
- 64 KB Internal SRAM
- 324-ball TFBGA
- Low power, Vcore 1.0V
AT91SAM9G45 CPU Module Resources Software In the Linux area you'll find the U-BOOT bootloader. Support for PM9G45 is a part of the U-BOOT mainline. The latest version can be obtained from the U-BOOT git repository. Documentation You can also purchase this module mounted on an evaluation board, or in a complete starter kit with evaluation board and in-circuit programmer/debugger.
|
