400MHz ARM9 mini-PCI CPU module with Ethernet, 4x UARTs, 2x USB2.0 Host, 1x USB2.0 Device, microSD Card, 10-bit ADC and RTC. Embedded Linux pre-loaded. Eddy-S4MV2.5 AT91SAM9G20 CPU Module Highlights - 400MHz ARM9 CPU with 8MB DataFlash and 32MB SDRAM
- mini-PCI from factor, 122 contacts
- Wireless WiFi Option via Eddy-Wifi plug-on module (see options at bottom of this page)
- 10/100Base-T Ethernet with Auto MDI/MDIX
- 2x USB 2.0 Full Speed (12Mbps) Host
- 1x USB 2.0 Full Speed (12Mbps) Device
- MicroSD Card Holder (max 16GB, SDHC Support)
- 4x UARTs
- Watchdog Timer & Real Time Clock with Backup-Battery (CR1220) Holder
- Max 34 Programmable General Purpose I/Os
- Supported by Development Kit including SDK and API
- Embedded Linux with TFTP, FTP and Web servers, manageable via Web, SNMP and PortView Utility
- Easy to use Eclipse based IDE LemonIDE
- Easy to use Windows utilities (COM Port Redirector, PortView & TestView)
- Power input: 3.3V DC
- Dimension: 59.75 × 61.80mm
- Operating Temp: -40C to +85C
Optional Eddy-S4M Development Kit and JIG Baseboard The optional Eddy-S4MV2.5 Development Kit provides an easy testing and evaluation environment for Eddy applications. The development kit provides regulated power to the Eddy-S4M CPU module and provides easy access to all on-board interfaces (UARTs, Ethernet, USB) via physical connectors. A on-board 2x10 JTAG connector allows for in-circuit debugging and programming and a 2x22 pin male header provides easy test access to all Eddy-S4M module General Purpose I/Os. The optional Eddy-S4M-JIG Baseboard provides an Ethernet and USB Host Connection and regulated power input. Two 2x23 pin male header provide easy access to the Eddy-S4M CPU module signals for testing and adding additional circuitry. SDK, API & Source Code Support Eddy can upload and execute customized user applications. To enable you to program your own socket/serial communication applications with the least amount of time and effort, SystemBase provides arrays of development support including a SDK (Software Development Kit), API (Application Programming Interface) and Source Code. Windows Utility Support Utilities to monitor and test your finalized products over network and serial interfaces are provided at no cost. The SystemBase management utilities, COM port redirector, PortView and TestView utilities allow you to monitor and administer your application. Eddy-S4M Specifications | Hardware | | | CPU | Atmel AT91SAM9G20 (ARM9), 400MHz | | Memory | 8MB Data Flash, 32 MB SDRAM | | Ethernet Interface | 10/100 Base-T (Pin Header) | | UART Signals | UART1: DCD, RxD, TxD, DTR, DSR, RTS, CTS, RI
UARTs 2,3,4,: RxD, TxD, RTS, CTS | | USB2.0 Full Speed | 2x USB Host, 1x USB Device | | SD CARD | microSD Card Holder, supports up to 16GB SDHC cards | | Analog-to-Digital Converter (ADC) | 4 channels, 10-bit resolution | | Two Wire Interface (TWI), I2C Interface | Master, Multi-master and slave mode | | SPI Interface | 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects | | MCI | MMC spec v3.11 / SDIO spec v1.1 / SD Card Spec v1.0 Up to 2GB, 12.5Mbps | | GPIO | Max. 34 Programmable I/O Pins | | Power Input | 3.3V, 200mA max. | | Dimensions | 25 x 42 x 6 mm | | Weight | 7 g | | Networking | | | Protocols | TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP, SNMP 1&2, SSH, SSL | | Ethernet Interface | 10/100Mbps MAC/PHY | | Network Address | Static IP, DHCP | | Software | | | O/S | Embedded Linux | | Management Tools | SNMP, Web, PortView | | File Uploads | TFTP, FTP, Web | | Development Tools | LemonIDE & SDK | | Environmental | | | Operating Temp | -40C to +85C | | Storage Temp | -60C to +150C | | Humidity | 5 to 95%, Non-Condensing | | Approvals | | | CE Class A, FCC Class A,ROHS Compliant | Package Contents - Eddy-S4MV2.5 Module
- Utilities & Documents CD
Optional Recommended Products for this Item
|
