Universal 4x Gang Programmer with 8-bit/16-bit ROM/FLASH Emulator, Logic Analyzer and Pattern Generator Options

The Uprog Gang 4x is a universal and extremely fast device programmer. It supports both in-circuit and out-of-circuit programming. Thanks to a USB 2.0 interface and specialized microprocessor this universal gang programmer achieves short programming times that are close to the chip vendors' maximum ratings.

Uprog programmers support Flash memories (typical and NAND), EPROMs, EEPROMs, serial EEPROMs, microcontrollers, and PLDs/CPLDs. All software updates are free of charge. View current list of supported devices.

This unit is more than just a universal chip programmer. Through optional software licenses the Uprog series of programmers can also be used as an 8-bit or 16-bit ROM and FLASH memory emulator, or a Logic Analyzer and Digital Pattern Generator. The programmer ships with a standard 128kBytes of internal memory, but can be upgraded to up 512kBytes (see add-on options below).

The programmer consists of four independent programming modules. Each programming module has 48 fully universal and configurable pin-drivers, which allows you to use your already existing collection of chip programming adapters.

A wide range of supply and programming voltages ensures that future low-voltage devices will be supported.

The four fully independent programming modules further increase the efficiency of the programmer: Each module can start the programming process independent of the status of the other programming modules (concurrent, asynchronous programming) as soon as a chip is inserted. Each module also provides an in-circuit programming connector.

The included PC programming software supports Windows versions 2000 and higher. The software can support multiple Uprog Gang programmers connected to a single PC.

Universal 4x Gang Programmer Features

• Four independent programming modules in one case
• USB interface — USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
• LCD display and keyboard
• Specialized FPGA based microprocessor (20 ns cycle)
• Programming times close to chip vendors' maximum ratings
• Four in-circuit programming connectors (ICP)
• 4x48-pin universal, independent pin drivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz and GND
• No adapter required for any DIL devices
• Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers
• Adapter Creator feature allows use of programming adapters from different providers
• Pin contact check feature
• Test of digital ICs
• 8-bit EPROM/Flash emulator (option)
• 16-bit EPROM/Flash emulator (option)
• Ulogic: Uprog-based logic analyzer with pattern generator feature (option)
• Multi-color status LEDs: power, busy, error, good
• Banana jack on the case for grounding purpose and ESD protection
• Software for Windows 2000/XP/Vista/Win7 supports many independent programmers simultaneously

Sample programming times

In-Circuit Programming Connector (ICP)

The Uprog Gang programmer has a built-in interface for in-circuit programming, which allows you to program chips via SPI, I2C, BDM, JTAG, 1 WIRE, 3 WIRE and other interfaces. The serial programming interface was designed to achieve maximum data speed transfers and to allow signal voltage level adjustment for any technology.

In-Circuit Programming Connection Features:

• Adjustable voltage levels (1.2V - 5V)
• Fast data transfers
• Flexible connection between programmer and programmed device
• ICP Interface supports VPP, VCC, GND, CLK, and 6 universal IO pins

ICP also supports the pin-check feature, which monitors the signal connection to the chip to assure proper contact.

Adapter Creator Feature

Adapter Creator allows you to use many programming adapters from different providers. You can scan the pin connections of an adapter, save it to file and then use it with selected devices.

Pin Checking Feature

Uprog programmers always check if all chip pins make good contact to the programming socket before the start of programming. You can easily see if you inserted a chip incorrectly; pins which have poor contact are shown with red labels in the PC programming software. Checking for proper insertion and good pin contact virtually eliminates any incorrectly programmed or damaged chips.

Optional 8-bit EPROM Emulator

Optional 16-bit EPROM / Flash Emulator

Optional Ulogic — Digital Signal Analyzer and Pattern Generator

Through an additional software license (see add-on options below) you can upgrade Uprog programmers to a 16-channel, 200MHz Logic Analyzer and 16-channel digital pattern generator. A small adapter board that plugs into the programmer's socket and connects with 16 test probes is included with this upgrade. Combine this option with the 512KB Memory Upgrade option to increase the amount of data you can capture.

Package Contents

• uProg Gang 4x Programmer
• CD-ROM with software
• In-circuit programming cable (4 units)
• USB cable
• Power supply

Software Downloads

• Go to the Uprog Gang 4x Downloads Page to download the Uprog 2 software and Uprog 2 USB driver. If you purchase the optional Logic Analyzer & Pattern Generator license, you'll also need the DAQ 2 software.

Lead time: 1 week