This is a 5V ATmega328 board that runs at 16MHz and is pre-programmed with the Arduino bootloader (select Arduino Duemilanove or Nano w/ ATmega328 within the Arduino software) that allows you to upload code to the ATmega328 via serial UART using the open-source Arduino development environment.

Arduino Pro does not come with connectors populated, so you can solder in any connector or wire with any orientation you need. The DC power jack footprint is available, but not populated. You can order a matching power jack and rectangular pin headers as add-on options at the bottom of this page. We also offer a 5V USB-to-Serial cable as an add-on option, which you could plug in to the board's UART connector to enable the board to be connected to a PC's USB port.

5V Arduino Pro 328 Board Features

• ATmega328 running at 16MHz external resonator
• USB connection off board
• 5V regulator
• Max 150mA output
• Over-current protected
• Reverse-polarity protected
• DC input 5V up to 12V
• Resettable fuse prevents damage to board in case of short
• Power Select switch acts as on/off switch
• Dimensions: 2.1 × 2.05" (53.34 × 52.08 mm)

About Arduino

Arduino is an open-source platform based on boards featuring an Atmel AVR microcontroller with a pre-programmed bootloader and a development environment that implements the Processing / Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

5V Arduino Pro 328 Board Resources

• Arduino Home Page
• Guide to Getting Started with Arduino
• Arduino Programming Language Reference
• Arduino Forum
• Arduino Pro 328 5V Schematic
• Eagle Files