A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single-cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.
This board has a JST connector, which will connect to our JST terminated 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of these LiPo chargers.
LilyPad is a wearable e-textile technology developed by Leah Buechley. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!
- 18mm outer diameter
- Thin 0.8mm PCB
Optional Recommended Products for this Item
|2-pin Female JST Connector, 2mm pitch, with 5-inch Wires||+|| US$0.95|
|Barrel Jack to 2-pin JST Adapter, 2.1x5.5mm Jack, 2mm JST||+|| US$2.95|
|Polymer Lithium Ion Battery, 850mAh, JST Connector||+|| US$9.95|
|Polymer Lithium Ion Battery, 2000mAh, JST Connector||+|| US$16.95|
|Polymer Lithium Ion Battery Pack, 6Ah, JST Connector||+|| US$29.95|