The USBMOD5 is an integrated module based on the FTDI FT2232C Dual Channel USB UART / FIFO IC. The module features two Multi-purpose UART/FIFO controllers that can be configured in several different modes depending on the application.

USB-to-Dual-UART 40-pin DIP Module Features

• Single module Dual Channel UART/FIFO USB solution
• Based on the FTDI FT2232C Dual Channel USB UART / FIFO IC
• On-board 6 MHz crystal
• External EEPROM on board for USB enumeration data
• No external passive components required
• 40-pin Dual In-line Package which is ideal for prototyping
• Fits into a standard 40-pin 600mm IC socket
• Transfer Data Rate 300 to 1 Mega Baud (RS232)
• Transfer Data Rate 300 to 3 Mega Baud (TTL and RS422/RS485)
• Auto Transmit Enable control for RS485 serial applications using TXDEN pin
• FT245BM-style FIFO interface option with bi-directional data bus and simple 4-wire handshake interface

• Enhanced Bit-Bang Mode interface option
• Synchronous Bit-Bang Mode interface option
• CPU-Style FIFO Interface Mode option
• Multi-Protocol Synchronous Serial Engine (MPSSE) interface option
• MCU Host Bus Emulation Mode option
• Fast Opto-Isolated Serial Interface Mode option
• Interface mode and USB Description strings configurable in external EEPROM
• EEPROM configurable on board via USB
• Support for USB Suspend and Resume conditions via PWREN#, and SI/WU pins
• Integrated Power-On-Reset circuit, with optional Reset input and Reset Output pins
• 5V and 3.3V logic I/O Interfacing with independent level conversion on each channel
• Integrated 3.3V LDO Regulator for USB I/O
• Integrated 6 MHz to 48 MHz clock multiplier PLL
• USB Bulk or Isochronous data transfer modes
• 4.35V to 5.25V single supply operating voltage range
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 Full Speed (12 Mbits/second) compatible

Download