LPC2294 Header Board Features

• MCU: 16/32-bit LPC2294 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, External Memory Bus, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
• 1MB (256K x 32 bit) 12 ns 71V416 SRAM
• 4MB (2048K x 16 bit) 70 ns TE28F320C3BD70 C3 Intel FLASH
• Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM-JTAG
• Powered through USB port (or through external 5V DC supply when not connected to USB)
• USB-to-RS232 converter
• Two on-board voltage regulators 1.8V and 3.3V up to 800mA current
• Power supply LED and filtering capacitor
• Slide switch for choosing ICSP or RUN mode
• Slide switch for selecting Boot from External or Internal Flash
• RESET button
• RESET circuit can be controlled externally by Philips ISP utility via USB-RS232 virtual port
• JRST jumper for enabling external reset control by RS232
• DBG jumper for JTAG enabling
• BSL jumper for bootloader enabling
• 14.7456 MHz crystal installed in socket for easy replacement
• Extension headers for all µC ports with IDC34 connectors (same as PC floppy drive cable)
• PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

LPC2294 Header Board Resources

This board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software.

Ships from: USA
Leadtime: In stock