LPC2214 Header Board Features - MCU: 16/32-bit LPC2214 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, External Memory Bus, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
- 1MB (256K x 32 bit) 12 ns 71V416 SRAM
- 1MB (512K x 16 bit) 55 ns MX26LV800BTC FLASH
- Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM-JTAG
- Powered through USB port (or through external 5V DC supply when not connected to USB)
- USB-to-RS232 converter
- Two on-board voltage regulators 1.8V and 3.3V up to 800mA current
- Power supply LED and filtering capacitor
- Slide switch for choosing ICSP or RUN mode
- Slide switch for selecting Boot from External or Internal Flash
- RESET button
- RESET circuit can be controlled externally by Philips ISP utility via RS232
- JRST jumper for enabling external reset control by RS232
- DBG jumper for JTAG enabling
- BSL jumper for bootloader enabling
- 14.7456 MHz crystal installed in socket for easy replacement
- Extension headers for all µC ports with IDC34 connectors (same as PC floppy drive cable)
- PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
LPC2214 Header Board Resources LPC2214 Header Board Schematic Test software and basic routines for access to external FLASH/SRAM OpenOCD + Eclipse set of projects 1.00 See the complete list of projects included here. This board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software. Ships from: USA
Leadtime: In stock
Optional Recommended Products for this Item
|
