This is a combination of the Raspberry Pi Through-Hole Prototyping Board Kit and the 0.5mm-pitch 44-pin QFP/QFN-to-DIP Adapter PCB. This bundle will let you design your own shield for the Raspberry Pi, including some SMT components. The adapter board uses the patented Schmartboard|ez design that makes soldering surface-mount devices easy. RPi Prototype Board This add-on board is the perfect way to add through-hole components to your Raspberry Pi project. The Schmartboard Through-Hole Prototyping Add-On Board for Raspberry Pi has the following unique features: - Schmartboard's signature offset through-hole grid which expands part placement options (it's two 0.1"-pitch grids with 0.5" offset)
- An extra row of holes for easy access to Raspberry Pi's General I/O signals
- Rows of Power and Ground strips for easy and flexible power-up and circuit grounding
- Pre-routed traces to minimize the use of wire jumpers
- Has a slot for the video cable to keep the circuit clean and unencumbered
- Circuits for four level shifters to add devices more simply regardless of signal values
- Marked area where the Raspberry Pi USB and Ethernet connectors are located, to avoid conflicts
- Kit includes the PCB, two 2×13-pin stackable headers, and a 170-point solderless breadboard
SMD Adapter PCB The adapter supports a 44-pin QFP or QFN device with 0.5mm pitch (7×7mm body). The board also includes room for 0805 SMT discrete components (e.g. a bypass capacitor), and pads for easy access to ground. Also, a large plated hole in the center of the device area allows for the addition of solder to utilize ground pads on the bottom of a device. A strip of 40 male pin headers is included. It does not provide enough pins to use this board! Be sure to use the checkbox below to add another strip to your order. The strips then can be snapped apart so that you can create the individual 22-pin segments needed to complete the 44-pin DIP package, and the 2-pin segments for the 0805 component headers. If the SMT device you want to use on your Raspberry Pi prototype board is in a different package, have a look through the entire list of bundles to find one with the adapter you need. RPi Prototype Board and SMD Adapter Resources
Optional Recommended Products for this Item
|
