- MAX3232ESE+ RS232 transceiver
- Converts TTL level logic to RS232 levels
- Supports 5-wire (RX, TX, RTS, CTS) serial port
- Data rates up to 120kbps
This TTL-to-RS232 converter features a 2×5-pin TTL input header and a DB9-M RS232 output port. The pinout of the input pins makes it plug-in compatible with the SBC-SAM9G45 development board's COM0-COM3 expansion headers (or the Bus-Serial expansion module's J3-J6 headers). A ribbon cable is provided to make that connection. However, the standard 2.54mm pitch of the header pins makes it easy to wire up to practically any development system with TTL UART headers. Input Interface TTL level input, 2×5-pin 2.54mm (0.1") pitch header. The pinout is printed on the PCB for easy reference. | Pin | Signal | Pin | Signal | | 1 | N/C | 2 | RXD | | 3 | TXD | 4 | N/C | | 5 | GND | 6 | N/C | | 7 | RTS | 8 | CTS | | 9 | N/C | 10 | VDD33 (3.3V) | Output Interface RS232 level, DB9 Male connector. The table below mimicks the orientation of the connector on its side. | Pin | Signal | Pin | Signal | | 5 | GND | 9 | N/C | | 4 | N/C | 8 | CTS1R | | 3 | TXD1R | 7 | RTS1R | | 2 | RXD1R | 6 | N/C | | 1 | N/C | | | Download MAX3232 Datasheet
|
