This USB-to-Serial cable has six individual wires with female connectors (crimp-on) that fit onto standard rectangle 0.1" spaced male headers.

The USB-to-Serial cable is a USB-to-Serial (3.3V TTL level) converter cable which allows for a simple way to connect 3.3V TTL interface devices to USB.

This USB-to-serial cable uses a FTDI FT232RQ converter chip, which is housed inside the USB 'A' connector, and is terminated at the end of a 1.8 m (70") cable with 6 individual wires with female header connectors, which provide access to transmit (TxD), receive (RxD), RTS#, CTS#, Vcc (5V), and GND signals. This allows you to connect the USB-to-serial cable to any board where the 3.3V TTL UART signals are available via square male header pins.

The 3.3V TTL signals are color coded as follows:

Color	Signal
Black	GND
Brown	CTS#
Red	+5V supply from USB
Orange	TXD
Yellow	RXD
Green	RTS#

This USB-to-serial converter cable is fully RoHS compliant. It is FCC and CE approved.

This cable can be used for example on the U_DEBUG connector found on the OLinuXino-MAXI and OLinuXino-MICRO.

Downloads