This is a black plastic bezel designed to facilitate mounting and settling of units when using a 4D Systems uLCD-43PT/uLCD-43DT intelligent display module, Armadillo-43T embedded Linux module, or 4DLCD-FT843 EVE display. The bezel provides not only a sleek cover for the display, but also an easy method to panel-mount it into a secure enclosure. An enclosure is not included. Spring clips attach to the bezel in four locations to hold tightly onto an enclosure or wall panel. This allows for a range of panel thickness from 1mm to 2.5mm without the need to add washers. Bottom views, showing uLCD-43PT module (left) and 4DLCD-FT843 (right) installed:
Four of the remaining screw holes can be used to fit the spring clips, like so:
 There also is a white version of this bezel. Note: This bezel is designed for indoor use only. It is not weather-sealed, nor does it bear any Ingress Protection (IP) rating. Use with care — preferably in a clean environment, as the bezel offers little protection to the circuitry against moisture or particles. 4.3-inch Bezel Features - Suitable for the uLCD-43PT or 4DLCD-FT843
- Provides a simple method to panel-mount the display module, and provides a finished look to the surround of the display
- Simple cut-out required; no mounting holes to be drilled in the panel
- Brass mounting inserts in the rear of the bezel for secure and durable fastening
- 4x Spring Clips for attaching the bezel to your panel or enclosure
- 8x M2 mounting screws and washers included
Download 4D-BEZEL-43 Specifications and Instructions for Use with uLCD-43PT Download 4D-BEZEL-43 Specifications and Instructions for Use with 4DLCD-FT843
|
