This is a 20-conductor Flat Ribbon Cable for use with 2x10 IDC connectors with 0.1" pitch. The cable has a conductor spacing of 0.127cm (0.05"). Electronic Characteristics - Spark test: 2500V
- Dielectric strength test: Minimum 2 KV in 1 minute
- Conductor resistance: Maximum 237 Ω/km
- Insulation resistance: Minimum 100 MΩ-km
- Capacity: 44pF/m (G-S-G)
- Inductance: 1.45µH/m
- Characteristic Impedance: 105 Ω (G-S-G)
- Propagation delay time: 4.2 ns/m
Conductor: Stranded - AWG size: 28 AWG
- Number of strands in each conductor: 7 / 0.127mm
- Lay of strands in each conductor: 0.5 inch at least
- Cross section area: 156 mil
Construction Drawing  Ordering the Length You Need The price shown is for each five feet of ribbon cable. If for instance you want 10 feet, then place quantity of 2 into your shopping cart.
|
