The C3188A is a 1/3" color camera module from Landzo with digital output that uses the OmniVision OV7620 highly integrated CMOS digital color video camera chip. The digital video port supplies a continuous 8/16-bit image data stream. All camera functions, such as exposure, gamma, gain, white balance, color matrix, windowing, are programmable through I2C interface. If combined with the OV511+ USB controller chip available from OVT, it can easily form a USB camera for PC applications. The camera is supplied as standard with a 3.6mm F2.0 lens on a 12mm screw mount allowing focal point adjustment. An 18-pin ribbon cable with 2×9-pin female IDC connectors is included also. VGA Camera Module Features - VGA resolution (640 × 480 pixel)
- Array size: 664 × 492 pixels
- 326,688 pixels, VGA/QVGA format
- Pixel size: 7.6 × 7.6 µm
- Effective image area: 4.86 × 3.64 mm
- Board dimensions: 33 × 33 mm
- Lens: f3.6mm, F1.6
- Digital video port supports 50Hz CCIR 656/601
- Progressive Scanning / interlace
- Data format: YCrCb 4:2:2 8/16-bit; RGB raw 8/16-bit CCIR601, CCIR656, ZV
- I2C interface
- Built-in 10-bit two-channel A/D converter
- Electronic Exposure: 500:1 with Gain / White Balance control
- Gamma Correction: 128 curve settings
- Image enhancement: brightness, contrast, gamma, saturation, sharpness, window, etc.
 - S/N Ratio: >48dB (AGC off; Gamma=1)
- Internal / external synchronization scheme
- Frame rate up to 30 fps
- Frame exposure / line exposure option
- Min. Illumination: <2.5 lux @ f1.4 (3000k)
- Dynamic range >72dB, anti-blooming, zero smearing
- Monochrome composite video signal output (60Hz only)
- 3.3V or 5V I/O, selectable by placement of 0Ω resistor
- Operation Voltage: 5V DC ±5%
- Operation Current: <120mA Active @ 30fps; <10µA Standby
VGA Camera Module Resources
|
