LPC2124 Ethernet Board Features - MCU: 16/32-bit LPC2124 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
- CS8900 Ethernet interface
- Two general-purpose buttons
- Potentiometer connected to analog input 0
- Dallas iButton interface
- 24LC515 EEPROM for external web storage
- Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM-JTAG
- Two on-board voltage regulators: 1.8V and 3.3V with up to 800mA current
- 5V power through USB
- Three LAN status LEDs; three general-purpose status LEDs
- Power supply filtering capacitor
- USB-to-RS232 interface
- 14.7456 MHz crystal
- RESET button
- RESET circuit can be controlled externally by Philips ISP utility via RS232
- JRST jumper for enabling external reset control
- DBG jumper for JTAG enabling
- BSL jumper for bootloader enabling
- PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
- Dimensions: 80 x 90 mm (3.15 x 3.55")
LPC2124 Ethernet Board Schematic Download freeware uIP TCP/IP Stack ported to the LPC-E2124 Board (doesn't use hardware for timing -- just a delay loop). OpenOCD + Eclipse set of projects 1.00 See the complete list of projects included here. This board is a low-cost tool with limited support. It does not ship with any documentation or software. Ships from: USA
Leadtime: In stock
Optional Recommended Products for this Item
|
