This is a 3.3V ATmega328 board that runs at 8MHz and is pre-programmed with the Arduino bootloader (select Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 within the Arduino software) that allows you to upload code to the ATmega328 via serial UART using the open-source Arduino development environment.
Arduino Pro does not come with connectors populated, so you can solder in any connector or wire with any orientation you need. The DC power jack footprint is available, but not populated. You can order a matching power jack and rectangular pin headers as add-on options at the bottom of this page. We also offer a 3.3V USB-to-Serial Cable as an add-on option, which you could plug in to the board's UART connector to enable the board to be connected to a PC's USB port. If you'd rather use your own normal mini-USB cable, there's a 3.3V USB-to-Serial Board that also plugs into Arduino Pro's UART connector.
Please note: The right-angle power switch on the side is fragile; please be gentle.
3.3V Arduino Pro 328 Board Features
- ATmega328 running at 8MHz external resonator
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, Accelerometers, sensors, etc.)
- USB connection off board
- 3.3V regulator
- Max 150mA output
- Over-current protected
- Reverse-polarity protected
- DC input 3.3V up to 12V
- Resettable fuse prevents damage to board in case of short
- Power Select switch acts as on/off switch
- Dimensions: 2.1 × 2.05 inches (53.34 × 52.08 mm)
Arduino is an open-source platform based on boards featuring an Atmel AVR microcontroller with a pre-programmed bootloader and a development environment that implements the Processing / Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
3.3V Arduino Pro 328 Board Resources
Optional Recommended Products for this Item
|DC Power Connector, Barrel-Coaxial 2.5/5.5 mm||+|| US$0.50|
|Pack of 12 Prototyping Wires for 0.025-inch Square Pins||+|| US$6.90|
|Rectangular Pin Header, Male, 1x40 Single Row, 2.54mm Spacing||+|| US$0.75|
|FT232RL USB-to-Serial Board for Arduino/LilyPad, 3.3V||+|| US$14.95|
|USB-to-Serial Cable: 3.3V TTL, 6-pin SIP Connector||+|| US$16.50|
|Power Supply 3-12V DC, U.S. plug, 6 connection tips||+|| US$11.00|
|Power Supply 3-12V DC, US/UK/Euro/AU Plugs, 100-240VAC||+|| US$13.00|
|Arduino Stackable Female Header Kit, for R2 & earlier||+|| US$1.50|
|Arduino Stackable Female Header - 8 Pin||+|| US$0.50|
|Arduino Stackable Female Header - 6 Pin||+|| US$0.50|