This OLinuXino development board enables code development of applications running on the i.MX233 microcontroller manufactured by Freescale Semiconductor.
iMX233-OLinuXino-MAXI is suitable for embedded programming enthusiasts, Linux hobbyists, gadget fans, and also professionals, since its low cost makes it very good solution for application-orientated embedded systems. It allows embedded software development without fully needing to understand the hardware side.
Note that you will need to download and build a Linux image. The user manual steps you through that task.
i.MX233 ARM9 Board Features
- i.MX233 ARM926J processor at 454 MHz
- 64 MB RAM
- SD card connector for booting the Linux image (card not included)
- Composite PAL/NTSC video output (RCA jack)
- Two USB High-Speed Hosts
- Ethernet 100 Mbit
- Stereo Audio Input (3.5mm jack)
- Stereo Headphones Audio Output (3.5mm jack)
- Two Buttons
- UEXT connector for connection of different peripherial modules (see below)
- 40-pin GPIO for connection of other hardware
- Board shaped to fit inside a Pactec JM42 enclosure
- Power supply input 6-16V DC
- PCB dimensions: 3.70 × 2.15 inches (94.0 × 54.6 mm)
- Nominal dimensions: 3.70 × 2.65 inches (94.0 × 67.3 mm)
Debugging Options If you don't have a separate monitor or display around, and you don't wish to swap cables constantly with your PC, there are three debug interfaces that provide a better option for your OLinuXino experience. Pins already are provided for the U_DEBUG interface, which requires only the USB-to-Serial Cable that you can select from the Optional Recommended Products list below. Pads are provided for you to install more traditional serial and parallel interfaces if you wish to use a Freescale-compatible JTAG dongle. See the user manual for details. Note that the image above and those in the manual show male headers installed for SJTAG; the SJTAG pads in fact are unpopulated through-holes.
Power Supply Consideration The 6V to 16V power from the power jack should have a maximum current of 1A. When using either of the power supplies selectable below, be sure to use a high enough voltage setting to drop the current low enough (7.5V setting on 120V mains; 9V setting on 220V mains). If you power the board with a typical 3.7V lithium-polymer or lithium-ion battery via the on-board JST connector, the USB hosts and LAN will be disabled.
Add-on UEXT Modules Available This board has a universal extension connector, UEXT, which allows you to add a peripheral module easily. The UEXT can provide I2C, RS232, SPI and power to the external device. Please see the UEXT Boards Category for a full list of modules that can plug into the UEXT port.
The iMX233-OLinuXino GitHub Page (see link below) contains example code for use with the following UEXT boards: MOD-IO2, MOD-LCD1x9, MOD-MAG, MOD-WII-UEXT, MOD-BT, MOD-GSM, MOD-IO, MOD-LCD3310, MOD-LCD6610 (a.k.a. MOD-NOKIA6610), MOD-RFID125-BOX, MOD-RS485-ISO, MOD-SMB380, MOD-TC-MK2, and MOD-ZIGBEE-UEXT.
i.MX233 ARM9 Board Resources
Optional Recommended Products for this Item
|USB-to-Serial Cable, 6 Female Header Wires, 3.3V I/O||+|| US$14.90|
|SJTAG Adapter, Serial-Parallel JTAG Conversion||+|| US$38.92|
|Bootable microSD with ARCH Linux for iMX322-OLinuXino-MINI-WiFi||+|| US$15.08|
|USB 2.0 Cable, 6ft., A-Male / B-Male||+|| US$6.00|
|USB 2.0 Cable, 6ft. A-Male / Mini-USB (5-pin) B-Male||+|| US$6.00|
|USB 2.0 Cable, 6ft. A-Male / Micro-USB (5-pin) B-Male||+|| US$6.00|
|USB 3.0 Cable, 6ft, A Male / B Male, Blue, Gold Plated||+|| US$6.00|
|USB 3.0 Cable, 6ft, A Male / Micro-B Male, Blue, Gold Plated||+|| US$6.00|
|Ethernet Cable, CAT5E 350MHz Unshielded, 7ft.||+|| US$3.60|
|Ethernet Crossover Cable, CAT5E 350MHz Unshielded, 5ft.||+|| US$7.00|
|RCA Audio/Video Cable, 6 ft., Shielded||+|| US$2.95|
|Power Supply 3-12V DC, U.S. plug, 6 connection tips||+|| US$11.00|
|Power Supply 3-12V DC, US/UK/Euro/AU Plugs, 100-240VAC||+|| US$13.00|
|Portable Self-Powered Speaker, 3.5mm Plug, Li-Ion Battery||+|| US$14.99|