Netus G20 is a 4×4cm Linux-ready module based on the Atmel AT91SAM9G20 (ARM9 core) CPU running at 400MHz. The Netus G20 CPU module integrates: - AtmelAT91SAM9G20 ARM9 CPU @ 400MHz
- 64MB of 1.8 Volt, 32-bit RAM
- 8Mbyte serial DataFlash.
- Four 60-pin connectors (0.8mm pitch) for access to all CPU on-chip features (USB, Ethernet, serial interfaces) and general-purpose I/Os
The Netus G20 CPU Module is specifically designed for high-volume industrial OEM applications. Check out the Fox Board G20, which uses the Netus G20 CPU Module to implement a powerful Embedded Linux System mini WEB server with physical connectors for Ethernet, 2x USB host, USB device, microSD Card socket and header access for all serial ports and general-purpose I/Os. AT91SAM9G20 CPU Module Features - CPU Atmel AT91SAM9G20 based on ARM926EJ-S ARM Thumb Processor with an internal clock speed of 400MHz.
- 64MBytes of SDRAM with 32bit parallel access.
- 8MBytes of Dataflash.
- Size 40x40mm. Weight 10g.
- Operating temperature range: -20° to +70° C
- Four 60-pin connectors (0.8mm pitch) with the following signals available both on top and bottom sides:
- One USB 2.0 (12 Mbits per second) Device Port.
- Two USB 2.0 (12 Mbits per second) Host Ports.
- One Ethernet MAC 10/100 Base T Port.
- Image Sensor Interface (ITU-R BT. 601/656 12 bit).
- One 2-slot MultiMedia Card Interface (MCI). SDCard/SDIO and MultiMediaCard Compliant.
- Four Universal Synchronous/Asynchronous Receiver Transmitters (USART) with RS485 support.
- Two 2-wire UARTs.
- Two Master/Slave Serial Peripheral Interfaces (SPI).
- One Synchronous Serial Controller (SSC). I˛S Analog Interface Support.
- Two Wire Interface
- Four-channel 10-bit ADC.
- 80 general-purpose I/O lines multiplexed with up to two peripheral I/Os.
- Individually Programmable Open-drain, Pull-up Resistor and Synchronous Output.
- All I/O Lines are Schmitt Trigger when programmed as inputs.
- Input Change Interrupt Capability on Each I/O Line.
- Serial 2-wire console port.
- JTAG Console and Boundary Scan on All Digital Pins (IEEEŽ1149.1).
- Two 3-channel 16-bit Timer/Counters with PWM Generation.
- Watchdog timer.
- Real-time clock (optional external battery backup).
- Very Slow Clock Operating Mode.
Downloads:
Optional Recommended Products for this Item
|
