Library Blog
USB Device Library presents the user set of functions required to handle USB device peripheral. A embedded user application program uses API defined in this library to access USB device peripheral. The library has set of functions implemented within library and also uses set of callback functions which will be implemented by application designer outside of the library. Library internaly handles standard device requests, leaving the user to process other requests.
As example of use of this library, following USB device classes are implemented:
HID (Human Interface Devices) class with mouse functionality
MSC BOT (Mass Storage - Bulk Only Transport) class.
CDC (Communications Device Class) class.
USB Device Library features following functions:
USBDev_Init
USBDev_IntHandler
USBDev_GetDeviceState
USBDev_StallEndpoint
USBDev_CtrlStall
USBDev_ClearStallEndpoint
USBDev_RegisterGetDescriptorHandler
USBDev_RegisterEventHandler
USBDev_RegisterSetupReqHandler
USBDev_RegisterDataReceivedHandler
USBDev_RegisterDataSentHandler
USBDev_ConvertStringToDescriptor
USBDev_SendPacket
USBDev_SetReceiveBuffer
USBDev_CtrlDataAck
USBDev_CtrlSendData
Release notes:
Version 1.2.1.0:
- CDC class for PIC16F145x added.
- Examples for PIC16F145x added.
Version 1.2.0.0:
- ARM TI Tiva MCUs supported.
- Examples for mikroMedia 5 for Tiva added.
- PIC16F145x library added.
Version 1.1.0.0:
- CDC class added
- Virtual COM port example added
- Minor bug fixes
USB Icon
USB Icon preview
View full image
ALSO FROM THIS AUTHOR
LTE IoT 7 Click is an add-on board representing a secure-cloud multi-band solution designed for IoT applications. This board features the SARA-R422M8S, a multi-band LTE-M/NB-IoT/EGPRS multi-mode solution with integrated high-performance standard precision M8 GNSS receiver for global position acquisition from u-blox. Equipped with familiar AT commands set over the UART interface, USB interface, and Network and Status indicators, it also provides over-the-air firmware updates, end-to-end trusted domain security, and u-Blox’s leading GNSS technology.
[Learn More]
H-Bridge 11 Click is a compact add-on board that allows a voltage to be applied across a load in either direction. This board features the MAX22200, an octal serial-controlled solenoid and motor driver from Analog Devices. The MAX22200 is SPI-configurable and rated for an operating voltage range from 4.5V to 36V. Each channel features a low impedance push-pull output stage with sink-and-source driving capability up to 1A RMS driving current. Its internal half-bridges can be configured as low-side or high-side drivers, supports two control methods (voltage and current drive regulation), and features a full set of protections and diagnostic functions.
[Learn More]
LED driver 6 Click is a high brightness LED or LED strip driver, designed to be used in tunable Smart Connected Lighting (SCL) applications. It is based on the AL1781, a single-channel PWM dimmable linear LED driver.
[Learn More]
