This are read only contents of the former OpenWrt wiki system. The pages are provided for archival purposes only. Refer to https://openwrt.org/ for up-to-date information.

User Tools

Site Tools


toh:olimex:imx233-olinuxino

Olimex IMX233 (OLinuXino)

The Olinuxino is a low-cost development board for applications like point-of-sale terminals. It comes in different buildouts, all include a microSD slot to boot the OS from.

Supported Versions

Hardware Highlights

SoC Ram Flash Network USB Serial JTag UEXT
Freescale i.MX233 64 MiB None 1x FE, depends on model yes Yes No Depends on model

UEXT is an open standard port to provide serial, I2C and SPI expansion ports.

  • IMX233-MAXI: Ethernet, 2 USB, UEXT, TV-out
  • IMX233-MICRO: 1 USB, TV-out
  • IMX233-MINI: 3 USB, UEXT, TV-out
  • IMX233-MINI-WIFI : Optional RTL8188 WIFI, 3 USB, UEXT, TV-out

Status

Working

  • USB
  • LAN
  • RTC
  • watchdog
  • Audio (considered as staging) [last worked with 3.18, driver needs to be fwdported]
  • crypto (DCP, data co-processor) [doesn't work with 4.4]
  • SPI (working, but keep in mind that it is half-duplex and so you need to modify other drivers to work with it, see example)

Being worked on

  • I2C
  • LRADC (done but needs testing / integration)

Not being worked on

  • TV-out

Installation

This section details what is required to install and upgrade OpenWrt. The generic procedure is described here: generic.flashing; this devices don't have a flash chip soldered to the PCB but an SD-Card slot.

Installation process for image built from trunk

We assume /dev/sdc is the SD card.

  • Run make menuconfig
  • Select device profile - f.e. Olinuxino-mini
  • Start the build
  • The built SD card images will be in bin/mxs
  • dd if=bin/sunxi/openwrt-mxs-olinuxino-maxi-sdcard.img of=/dev/sdc

Manual installation process with assembling the SD card manually

  • Partition the SD card

We assume /dev/sdc is the SD card.

# fdisk /dev/sdc
Command (m for help): n
Partition type:
  p   primary (0 primary, 0 extended, 4 free)
  e   extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-7626751, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-7626751, default 7626751): +16MB
Partition 1 of type Linux and of size 15.3 MiB is set

Command (m for help): t
Selected partition 1
Hex code (type L to list codes): 53
Changed system type of partition 1 to 53 (OnTrack DM6 Aux3)

Command (m for help): n
Partition type:
  p   primary (1 primary, 0 extended, 3 free)
  e   extended
Select (default p):
Using default response p
Partition number (1-4, default 2):
Using default value 2
First sector (33298-7626751, default 33298):
Using default value 33298
Last sector, +sectors or +size{K,M,G} (33298-7626751, default 7626751):
Using default value 7626751
Partition 2 of type Linux and of size 3.6 GiB is set

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

  • Copy the kernel and the rootfs to the SD card

# dd if=openwrt-imx23-uImage of=/dev/sdc1
[...]

# dd if=openwrt-imx23-root.ext4 of=/dev/sdc2
[...]

#

Installation process for U-boot

  • Assume /dev/sdc is the sdcard

root@voyager:/# fdisk /dev/sdc

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-957, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-957, default 957): +1M

Command (m for help): t
Selected partition 1
Hex code (type L to list codes): 53
Changed system type of partition 1 to 53 (OnTrack DM6 Aux3)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (3-957, default 3):
Using default value 3
Last cylinder, +cylinders or +size{K,M,G} (3-957, default 957): +32M

Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 6
Changed system type of partition 2 to 6 (FAT16)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (20-957, default 20):
Using default value 20
Last cylinder, +cylinders or +size{K,M,G} (20-957, default 957): +48M

Command (m for help): p

Disk /dev/sdc: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders
Units = cylinders of 4032 * 512 = 2064384 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1           2        4000+  53  OnTrack DM6 Aux3
/dev/sdc2               3          19       34272    6  FAT16
/dev/sdc3              20          44       50400   83  Linux

root@voyager:/# mkfs.vfat /dev/sdc2
mkfs.vfat 3.0.7 (24 Dec 2009)

  • Copy bin/mxs/openwrt-mxs-uImage onto sdc2/uImage
  • Copy bin/mxs/imx23-olinuxino.dtb onto sdc2/
  • dd if=openwrt-mxs-root.ext4 of=/dev/sdc3

Hardware

Serial for IMX-233-MAXI

You can use your usual serial levelshifter. Pinout is:

[UEXT]

RX TX GND
 o  o  o  o 

[USB/ethernet]

Further notes

The board uses a special boot image called bootstream / safeboot. The file includes a zImage, a compiled devicetree, and various preparation bootlets (power_, sdram_, linux_)- these are contained in package/imx-bootlets. The image is created by the elftosb tool.

A U-boot is being prepared by various people to replace the bootlets to enable easier debugging and further functions in the boot process.

Sound

Please note that this driver is considered staging, report any issues via the bugtracker. The driver last worked with 3.18, it's not compiling with later kernels.

root@OpenWrt:/# cat /proc/asound/devices
  0: [ 0]   : control
 16: [ 0- 0]: digital audio playback
 24: [ 0- 0]: digital audio capture
 33:        : timer

crypto

Speed comparison:

openssl speed test - without DCP

root@OpenWrt:/# openssl speed
[..]
OpenSSL 1.0.1e 11 Feb 2013
built on: Sat Aug  3 11:43:46 CEST 2013
options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,long) aes(partial) blowfish(ptr)
compiler: arm-openwrt-linux-uclibcgnueabi-gcc -fPIC -DOPENSSL_PIC -DZLIB_SHAREDl
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
md2                  0.00         0.00         0.00         0.00         0.00
mdc2                 0.00         0.00         0.00         0.00         0.00
md4               1221.34k     4409.45k    13695.06k    28755.72k    42207.91k
md5                770.62k     2825.05k     9062.14k    20410.71k    31790.42k
hmac(md5)         1291.85k     4533.70k    13017.43k    24584.87k    32867.63k
sha1               830.18k     2426.79k     5366.78k     7693.19k     8754.52k
rmd160               0.00         0.00         0.00         0.00         0.00
rc4              15884.10k    18503.87k    19388.33k    19536.61k    19502.42k
des cbc           2924.68k     3029.40k     3050.64k     3064.49k     3039.59k
des ede3          1040.07k     1055.76k     1058.47k     1057.21k     1056.77k
idea cbc             0.00         0.00         0.00         0.00         0.00
seed cbc          3346.20k     3659.71k     3742.18k     3770.03k     3750.05k
rc2 cbc           3970.83k     4179.16k     4244.74k     4252.37k     4237.52k
rc5-32/12 cbc        0.00         0.00         0.00         0.00         0.00
blowfish cbc      5666.74k     6133.76k     6247.70k     6287.36k     6270.35k
cast cbc          5020.75k     5623.05k     5814.36k     5853.41k     5846.36k
aes-128 cbc       4151.66k     4676.59k     4801.77k     4867.41k     4840.48k
aes-192 cbc       3734.17k     4136.76k     4245.25k     4265.51k     4259.84k
aes-256 cbc       3363.81k     3693.61k     3775.83k     3807.23k     3786.03k
camellia-128 cbc        0.00         0.00         0.00         0.00         0.0
camellia-192 cbc        0.00         0.00         0.00         0.00         0.0
camellia-256 cbc        0.00         0.00         0.00         0.00         0.0
sha256             926.62k     2333.77k     4427.94k     5680.13k     6179.98k
sha512             283.36k     1131.29k     1686.27k     2334.10k     2629.63k
whirlpool          222.14k      427.61k      672.86k      797.35k      844.11k
aes-128 ige       4320.98k     5158.07k     5415.59k     5471.14k     5073.58k
aes-192 ige       3860.77k     4503.74k     4697.64k     4739.41k     4422.57k
aes-256 ige       3479.71k     3977.30k     4133.97k     4174.45k     3923.97k
ghash             3208.61k     3327.17k     3351.19k     3362.76k     3361.45k
                  sign    verify    sign/s verify/s
rsa  512 bits 0.006620s 0.000542s    151.1   1843.8
rsa 1024 bits 0.029410s 0.001474s     34.0    678.5
rsa 2048 bits 0.172069s 0.004892s      5.8    204.4
rsa 4096 bits 1.177778s 0.017939s      0.8     55.7
                  sign    verify    sign/s verify/s
dsa  512 bits 0.005467s 0.005797s    182.9    172.5
dsa 1024 bits 0.014552s 0.017232s     68.7     58.0
dsa 2048 bits 0.048341s 0.060182s     20.7     16.6

openssl speed test - with DCP

root@OpenWrt:/# insmod dcp
[  525.100000] fsl-dcp 80028000.dcp: DCP crypto enabled.!
root@OpenWrt:/# openssl speed
[...]
OpenSSL 1.0.1e 11 Feb 2013
built on: Sat Aug  3 11:43:46 CEST 2013
options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,long) aes(partial) blowfish(ptr)
compiler: arm-openwrt-linux-uclibcgnueabi-gcc -fPIC -DOPENSSL_PIC -DZLIB_SHAREDl
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
md2                  0.00         0.00         0.00         0.00         0.00
mdc2                 0.00         0.00         0.00         0.00         0.00
md4               1358.63k     5335.25k    15765.97k    30980.78k    42292.94k
md5                871.15k     3376.38k    10442.15k    22012.88k    32022.53k
hmac(md5)         1227.54k     4241.75k    12183.86k    23785.13k    32593.64k
sha1               902.14k     2575.65k     5544.11k     7757.15k     8759.98k
rmd160               0.00         0.00         0.00         0.00         0.00
rc4              15880.56k    18517.80k    19216.95k    19459.07k    19447.70k
des cbc           2920.79k     3023.81k     3055.62k     3056.78k     3055.62k
des ede3          1038.14k     1054.17k     1051.84k     1058.13k     1054.44k
idea cbc             0.00         0.00         0.00         0.00         0.00
seed cbc          3334.82k     3661.16k     3740.80k     3770.71k     3750.05k
rc2 cbc           3973.51k     4180.35k     4241.75k     4251.33k     4254.38k
rc5-32/12 cbc        0.00         0.00         0.00         0.00         0.00
blowfish cbc      5666.39k     6135.62k     6246.05k     6287.70k     6249.17k
cast cbc          5021.43k     5640.57k     5815.72k     5871.51k     5846.36k
aes-128 cbc       4160.09k     4666.64k     4826.03k     4856.74k     4849.66k
aes-192 cbc       3726.74k     4131.73k     4248.73k     4272.13k     4250.98k
aes-256 cbc       3370.31k     3685.62k     3782.57k     3798.14k     3792.90k
camellia-128 cbc        0.00         0.00         0.00         0.00         0.0
camellia-192 cbc        0.00         0.00         0.00         0.00         0.0
camellia-256 cbc        0.00         0.00         0.00         0.00         0.0
sha256             987.86k     2427.37k     4503.52k     5727.57k     6161.93k
sha512             283.40k     1131.39k     1686.61k     2334.44k     2629.63k
whirlpool          221.40k      425.86k      674.13k      795.15k      840.97k
aes-128 ige       4312.87k     5152.62k     5403.59k     5480.79k     5059.11k
aes-192 ige       3868.01k     4509.20k     4692.05k     4743.72k     4426.41k
aes-256 ige       3472.76k     3984.94k     4124.37k     4167.68k     3913.34k
ghash             3214.30k     3321.15k     3355.82k     3357.41k     3364.18k
                  sign    verify    sign/s verify/s
rsa  512 bits 0.006644s 0.000542s    150.5   1846.5
rsa 1024 bits 0.029466s 0.001477s     33.9    677.1
rsa 2048 bits 0.172414s 0.004894s      5.8    204.3
rsa 4096 bits 1.177778s 0.017957s      0.8     55.7
                  sign    verify    sign/s verify/s
dsa  512 bits 0.005482s 0.005941s    182.4    168.3
dsa 1024 bits 0.014617s 0.017055s     68.4     58.6
dsa 2048 bits 0.048439s 0.058421s     20.6     17.1

Hardware details

MAXI MINI MICRO MINI-WIFI
Instruction set: ARM
Vendor: Freescale
Bootloader: ? U-Boot
System-On-Chip: i.MX233
CPU @Frq ARM9 @?MHz
Flash size: n/a, SD-Card slot
Flash Chip:
RAM size:
RAM Chip:
Wireless No1: distinct Chip: RealTek ??? w/ 3x3 MIMO for 2.4GHz 802.11b/g/n
Wireless No2: n/a
Switch: n/a
Modem: n/a
USB: Yes 1 x 2.0 / 3.0
Serial: Yes
JTAG: Yes

Bootlogs

dmesg

U-Boot 2016.01-rc3 (Jan 11 2016 - 21:23:43 +0100) CPU: Freescale i.MX23 rev1.4 at 454 MHz BOOT: SSP SD/MMC #0 DRAM: 64 MiB MMC: MXS MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading uImage 1547184 bytes read in 525 ms (2.8 MiB/s) Booting from mmc ... reading imx23-olinuxino.dtb 10068 bytes read in 28 ms (350.6 KiB/s) ## Booting kernel from Legacy Image at 42000000 ... Image Name: ARM OpenWrt Linux-4.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1547120 Bytes = 1.5 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Kernel Image ... OK Loading Device Tree to 43b5e000, end 43b63753 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.0 (wigyori@trabant) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48138) ) #1 Mon Jan 11 21:32:51 CET 2016 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: i.MX23 Olinuxino Low Cost Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p3 rw rootwait [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 60292K/65536K available (3250K kernel code, 92K rwdata, 880K rodata, 148K init, 187K bss, 5244K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0410d6c (4132 kB) [ 0.000000] .init : 0xc0411000 - 0xc0436000 ( 148 kB) [ 0.000000] .data : 0xc0436000 - 0xc044d354 ( 93 kB) [ 0.000000] .bss : 0xc044d354 - 0xc047c344 ( 188 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 911346093 ns [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns [ 0.070000] Calibrating delay loop... 227.32 BogoMIPS (lpj=1136640) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080000] CPU: Testing write buffer coherency: ok [ 0.080000] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.100000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.100000] pinctrl core: initialized pinctrl subsystem [ 0.110000] NET: Registered protocol family 16 [ 0.110000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.120000] cpuidle: using governor ladder [ 0.130000] cpuidle: using governor menu [ 0.160000] Serial: AMBA PL011 UART driver [ 0.160000] 80070000.serial: ttyAMA0 at MMIO 0x80070000 (irq = 17, base_baud = 0) is a PL011 rev2 [ 0.310000] console [ttyAMA0] enabled [ 0.390000] mxs-dma 80004000.dma-apbh: initialized [ 0.410000] mxs-dma 80024000.dma-apbx: initialized [ 0.420000] usbcore: registered new interface driver usbfs [ 0.420000] usbcore: registered new interface driver hub [ 0.430000] usbcore: registered new device driver usb [ 0.430000] pps_core: LinuxPPS API ver. 1 registered [ 0.440000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.440000] PTP clock support registered [ 0.450000] clocksource: Switched to clocksource mxs_timer [ 0.460000] NET: Registered protocol family 2 [ 0.460000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.470000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.480000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.490000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.490000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.500000] NET: Registered protocol family 1 [ 0.510000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.560000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.560000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.580000] io scheduler noop registered [ 0.580000] io scheduler deadline registered (default) [ 0.590000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.600000] Serial: AMBA driver [ 0.600000] 8006c000.serial: ttyAPP0 at MMIO 0x8006c000 (irq = 147, base_baud = 1500000) is a 8006c000.serial [ 0.610000] mxs-auart 8006c000.serial: Found APPUART 3.0.0 [ 0.620000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.630000] ehci-platform: EHCI generic platform driver [ 0.640000] i2c /dev entries driver [ 0.640000] 80010000.ssp supply vmmc not found, using dummy regulator [ 0.690000] mxs-mmc 80010000.ssp: initialized [ 0.690000] NET: Registered protocol family 10 [ 0.710000] NET: Registered protocol family 17 [ 0.710000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.720000] 8021q: 802.1Q VLAN Support v1.8 [ 0.740000] hctosys: unable to open rtc device (rtc0) [ 0.750000] usb0_vbus: disabling [ 0.760000] uart-pl011 80070000.serial: no DMA platform data [ 0.760000] Waiting for root device /dev/mmcblk0p3... [ 0.790000] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.800000] mmc0: new high speed SDHC card at address 0001 [ 0.810000] mmcblk0: mmc0:0001 00000 7.41 GiB [ 0.820000] mmcblk0: p1 p2 p3 [ 0.880000] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 0.890000] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.650000] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: (null) [ 1.660000] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 1.670000] Freeing unused kernel memory: 148K (c0411000 - c0436000) [ 1.870000] init: Console is alive [ 2.200000] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.200000] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.230000] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.230000] hub 1-0:1.0: USB hub found [ 2.240000] hub 1-0:1.0: 1 port detected [ 2.570000] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 2.720000] hub 1-1:1.0: USB hub found [ 2.720000] hub 1-1:1.0: 3 ports detected [ 2.870000] init: - preinit - [ 3.010000] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.120000] random: procd urandom read with 12 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 6.410000] mount_root: mounting /dev/root [ 6.420000] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [ 6.460000] procd: - early - [ 7.170000] procd: - ubus - [ 8.180000] procd: - init - Please press Enter to activate this console. [ 10.080000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.130000] stmp3xxx-rtc 8005c000.rtc: rtc core: registered 8005c000.rtc as rtc0 [ 10.170000] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 10.240000] mxs-dcp 80028000.dcp: Failed to register sha1 hash! [ 10.250000] mxs-dcp: probe of 80028000.dcp failed with error -22 [ 10.290000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.330000] nf_conntrack version 0.5.0 (944 buckets, 3776 max) [ 10.460000] xt_time: kernel timezone is -0000 [ 10.510000] PPP generic driver version 2.4.2 [ 10.520000] NET: Registered protocol family 24 [ 10.530000] smsc95xx v1.0.4 [ 10.610000] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-ci_hdrc.0-1.1, smsc95xx USB 2.0 Ethernet, 12:44:ec:27:d2:3b [ 10.620000] usbcore: registered new interface driver smsc95xx BusyBox v1.24.1 (2016-01-06 14:38:27 CET) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- DESIGNATED DRIVER (Bleeding Edge, r48203) ----------------------------------------------------- * 2 oz. Orange Juice Combine all juices in a * 2 oz. Pineapple Juice tall glass filled with * 2 oz. Grapefruit Juice ice, stir well. * 2 oz. Cranberry Juice ----------------------------------------------------- root@OpenWrt:/# [ 19.430000] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable o f remote wakeup [ 19.480000] device eth0 entered promiscuous mode [ 19.540000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready root@OpenWrt:/# root@OpenWrt:/# [ 63.640000] random: nonblocking pool is initialized root@OpenWrt:/# root@OpenWrt:/# cat /proc/cpuinfo processor : 0 model name : ARM926EJ-S rev 5 (v5l) BogoMIPS : 227.32 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 5 Hardware : Freescale MXS (Device Tree) Revision : 0000 Serial : 0000000000000000 root@OpenWrt:/#


Tags

toh/olimex/imx233-olinuxino.txt · Last modified: 2016/02/27 15:31 by mkschreder