Complete evaluation kit for Philips LPC2000 ARM7TDMI-S Core Microcontrollers The 16/32-bit LPC2000 family is based on a 1.8V ARM7TDMI-S core operating at up to 60 MHz together with a wide range of peripherals including multiple serial interfaces, 10-bit ADC and external bus options. The Embest LPCEB2000 Evaluation Board Kit is a complete evaluation environment. It contains a development board, a JTAG debugger interface, and a suite of software tools for embedded development. The kit consists of a motherboard and a daughterboard. You can choose a daughterboard with LPC2129, LPC2132 or LPC2292 installed. See below for full details on each daughterboard. LPC2000 Motherboard Features - Dimensions: 182 x 139 mm
- Temperature range: -45 to +85 °C
- Power input: +9V
- On-board regulator supplies 5V to daughterboard
- 2 Serial ports
- 1 CAN port
- Reset button
- 4x4 keyboard
- 8 indicator LEDs
- 2-channel A/D sampling input
- 2-channel PWM output (one to buzzer; one to PWM DAC)
- I2C bus
- 8-digit, 8-segment LED display
- Analog signal output to speaker
- 20-pin standard JTAG port
LPC2000 Daughterboards Using the drop-down menu at the bottom of the page, you can select one of the following daughterboards: LPCEB2000-S - LPC2129 CPU soldered (also accepts LPC2114/2119/2124/2194)
- 10 MHz crystal for CPU
- Powered by motherboard via on-board 1.8V and 3.3V regulators
- Power status LED
- JTAG enable/disable jumper
LPCEB2000-A - LPC2132 CPU soldered (also accepts LPC2131/2138)
- 10 MHz crystal for CPU and 32 kHz crystal for on-chip RTC
- Powered by motherboard via on-board 3.3V regulator
- Power status LED
- JTAG enable/disable jumper
LPCEB2000-B - LPC2292 CPU soldered (also accepts LPC2210/2212/2214/2290/2294)
- 10 MHz crystal
- 1 MByte x 16-bit External Flash
- 256 kBytes x 16-bit External SRAM
- Connectors for external bus interface: 0.1 spacing, 0.025 inē straight pin headers (one 10x2, one 20x2)
- Powered by motherboard via on-board 3.3V and 1.8V regulators
- Power status LED
- JTAG enable/disable jumper
- Trace enable/disable jumper
- Internal/External Flash boot select jumper
Each daughter board measures 65 x 61 mm. Note that any of the alternative CPUs listed can be installed on larger volume orders. Please contact us for more information. LPC2000 Development Kit Software In addition to the user manual and schematic diagrams, the provided CD-ROM includes: - Evaluation version of Embest IDE for ARM (available with the A1 and A2 bundles)
- LPC2xxx Flash ISP Utility (for Flash Programming via standard COM port)
- Boot software and test software
- Atmel AT91 C Library
- uCos Source Tree
- Sample Code:
- LPC_source (initialize and start up software)
- beep_test (Buzzer test application driven by GPIO)
- 8LED_test (8-segment LED display application)
- ADC_test (AD0 and AD1 test; show the value(mV) on 8-segment LED)
- SPI_test (Control 595 chip via SPI; light the 8 indicator lights)
- Time_test (Timer test application)
- Dog_test (Watchdog test software)
- I2C_test (I2C test software)
- EINT_test (external interrupt test application)
- key_test (Keyboard test)
- PWM_test (PWM test software)
- PWMDAC_test (PWMDAC example software)
- RTC_test (RTC application example)
- UART_test (UART drive example)
- DA_test (DAC test software for LPCEB2000-A daughterboard)
LPC2000 Development Kit Contents - LPCEB2000-I Motherboard
- Your choice of LPCEB2000-S, LPCEB2000-A or LPCEB2000-B daughterboard
- CD-ROM with Embest IDE for ARM Evaluation Version, software examples, user manual and schematic
- EasyICE JTAG to connect the board to your PC's parallel port
- Serial cable
- Parallel cable
- 9.0V DC Power Supply
Country of Origin: China
Leadtime: 3 days
Available Options:
| Daughterboard: |
|
|
