This module was made initially for those who wanted to use OLinuXino boards in automotive applications.
In its default configuration, the input range can be 15V to 36V DC, and it will provide a 12V DC output. If you close two solder jumpers on the back, the configuration is changed for an input of 9V to 36V, providing a 5V output. In either case, the maximum current output is 2.5A.
The board provides a few different connection options. Input can be either through a 2.5mm barrel jack or 5mm screw terminals. Output can be through screw terminals, a 2mm JST battery connector, or a USB-A connector (USB-A output available only in 5V configuration). Connect the optional PWR-CABLE to the screw terminals to create a 2.5mm barrel plug output, or the optional TOL-08639 to the USB connector to create a 2.1mm barrel plug output (limited to 5V output mode as the USB connector only is active when the jumpers are closed).
Optional Recommended Products for this Item