pH Sensor Probe (for Smart Water Ions)
This pH sensor is meant to be used in a Waspmote wireless sensor platform by plugging it into the Waspmote Smart Water Ions Sensor Board. Up to three different Dissolved Ions sensors can be connected to the Smart Water Ions Sensor Board at the same time as this pH sensor. The Smart Water Ions Sensor Board includes adapters from BNC to RP-SMA so you can connect these sensors to it.
Note: When using this sensor, you must have either the Single-Junction Reference Probe or the Double-Junction Reference Probe connected to the REFERENCE port of your Smart Water Ions Sensor Board. (Which you choose depends on which Dissolved Ions sensors you'll also be using.)
To get an accurate value from the sensor, it is necessary both to carry out a calibration and to compensate the output of the sensor for the temperature variation from that of the calibration moment.
pH Sensor Features
- Range: 0 to 14 pH
- Operating Temperature: 5 to 60 °C
- Internal Reference Type: Ag / AgCl
- Reader Accuracy: Dependent on calibration routine used
This sensor will not work on the Smart Water Sensor Board; there is a separate pH sensor available for that board. This sensor is for the Smart Water Ions Sensor Board.