The UUtools line of logic analyzers are highly productive tools designed for logic capture, analysis and decoding. Each feature is deeply integrated and complete. This LA2016 model has a sample rate of 200Msps and a measurement bandwidth of 40MHz. All UUtools logic analyzers have 16 channels. Cables and clips are included, as well as decoder plugins and a plugin development kit.
UUtools are designed with a level of engineering only found in professional logic analyzers. No matter how careful you are with a logic analyzer, static discharges (ESD) are inevitable. For this reason, UUtools have been engineered with extra ESD protection on everything that connects to the outside world: Channels, USB lines and Power lines. You won't melt a lead by accidentally connecting it to a power rail, because the UUtools ground leads are protected to ±12V with auto-reset and protection circuits.
You also will not harm UUtools by connecting the analyzer's channels to the wrong voltage level. All of UUTools' channels are protected from overvoltage and reverse voltages (protection levels are model specific).
You won't need to worry about powering everything in a specific sequence. With the UUtools Logic Analyzer you have an unrestricted power sequence. Whether it's the PC, Device Under Test or the analyzer itself — any of these can be powered up or powered down without fear of accidentally causing damage.
UUtools' hardware performance is not dependent on the PC load, speed or memory. True store-and-forward architecture guarantees full bandwidth capturing at full sample rate under all conditions.
The probe leads are built with the best materials: ultra-flexible 66-strand wire for ease of use and durability; .098 square housings for side and end stacking on .1 centers while providing stress relief to the wires; fully connectorized for easy replacement or leaving leads attached to a target.
UUtools Logic Analyzer Features The following table outlines the specifications of all three UUtools logic analyzers, so you can compare the three and choose the best one for your needs.
| || ||LA1016 ||LA2016 ||LA5016 |
|Input ||Sample Rate ||100 MHz ||200 MHz ||500 MHz |
|Min. Pulse Captured ||20 ns ||12.5 ns ||6.25 ns |
|Channels ||16 ||16 ||16 |
|Measurement Bandwidth ||20 MHz ||40 MHz ||80 MHz |
|Hardware Storage ||1 Gbit ||1 Gbit ||512 MBits |
|Hardware Sample Depth ||50M/channel ||50M/channel ||32M/channel |
|Max. Compression Depth ||10G/channel ||10G/channel ||5G/channel |
|Input Voltage Range ||-50V to +50V ||-50V to +50V ||-50V to +50V |
|Threshold Voltage ||0.8V to 1.6V ||0.8V to 1.6V ||1.0V to 2.0V |
|Input Impedance ||220 KΩ, 12 pF ||220 KΩ, 12 pF ||220 KΩ, 12 pF |
|Number of Channels ||2 ||2 ||2 |
|Output Frequency Range ||0.1 to 20 MHz ||0.1 to 20 MHz ||0.1 to 12.5 MHz |
|Min. Interval for Frequency Adjustment ||10 ns ||10 ns ||10 ns |
|Min. Interface for Pulse Width Adjustment ||5 ns ||5 ns ||5 ns |
|Output Voltage ||+3.3V ||+3.3V ||+3.3V |
|Export Impedance ||50Ω ||50Ω ||50Ω |
|Power Supply Port ||USB 2.0/3.0 ||USB 2.0/3.0 ||USB 2.0/3.0 |
|Standby Current ||130mA ||150mA ||300mA |
|Maximum Active Current ||260mA ||300mA ||550mA |
|Supported Protocols ||UART (RS232/485/422), I2C, SPI, CAN, DMX512, I2S/PCM, Manchester, 1-Wire, Simple Parallel, UNI/O |
|Supported OS ||Windows XP, Vista, 7, 8 (32-bit and 64-bit) |
- LA2016 Unit
- Three 9-pin wires
- Two 2-pin wires
- 20 test hooks
- USB cable
- CD-ROM with software
UUtools Logic Analyzer Resources
Ships from: China
Lead time: 1 week