This is a 7-inch LCD with an interface board that provides three different connection options: a 2×20-pin 0.1"-pitch header and two 2×20-pin 0.05"-pitch headers with different pin arrangements. These interfaces make this display compatible with the following boards:
A10-OLinuXino series (including the A10S) A13-OLinuXino series A20-OLinuXino series
For regular OLinuXino boards, you'll use the 0.1"-pitch header and will need the CABLE-IDC40-15cm ribbon cable to connect.
For OLinuXino boards designated LIME or LIME2, you will use one of the 0.05"-pitch headers (one is for original LIME boards; one is for LIME2 boards) and will need the CABLE-40-40-10CM ribbon cable to connect.
This version of the display does not come with a touchscreen. The images show the LCD-OLinuXino-7TS which is this display plus a resistive touchscreen.
OLinuXino LCD Board Features
- Innolux 7-inch (480×800) AT070TN9X display with backlight
- 16.7 million colors
- Anti-glare surface
- Three interfaces for connection to A13/A10/A10S/A20-OLinuXino boards, including LIME2
- 5V power can be provided from external supply via jack or from host board via LCD interface connector
- Suitable for Linux and Android video output
OLinuXino LCD Board Resources
Mounting Frame Kit Available You also might want to pick up the optional Mounting Frame Kit for this display. The kit consists of a plastic frame and four clamps that you can place anywhere along the frame and use to mount the display to a flat surface.
Setting Up the Display Please check the user manual and/or Wiki page of your OLinuXino board for instructions about configuring it to use this display. Depending on which board and OS you're using, you may have to download a specific OS image, a specific script file, or simply run a configuration command. Some board/OS combinations may not support this display.