The IOR44 Front-End Board can be connected to the front-end connector of certain PIC Boards (see list below) adding 2 analog or digital inputs, 2 open collector outputs and 2 relay outputs.
The following I/O ports are made available via a 3.81mm 10-pin terminal block connector (Phoenix connector).
- 4 Analog/Digital inputs
- 2 Relay outputs, rated at 2A at 30V DC or 1A at 125V DC
When connected to a PIC Main Board, the front-end board can provide the main board with power via terminal block pins 9 and 10. Note, that when doing this no power should be applied to the main board.
Front-end board connector pin B6 (usually routed to PIC port pin RB6) is connected to a red LED.
A matching 10-pin Phoenix screw terminal connector that plugs into the connector on the board is included with the board.
Compatible PIC Main Boards
This front-end board can be used with the following PIC boards:
Microchip PIC Board, RS232 & CAN interface, 28-pin PICs (SBC28PC-IR2)
Microchip PIC Board, RS485 & CAN interface, 28-pin PICs (SBC28PC-IR4)
Microchip PIC Board, RS232, 28-pin PICs (SBC28DC)
Microchip PIC Ethernet Board with RS232 Interface (SBC45EC)
This PIC board does not ship with any documentation or software. You will have to download the documentation from the link provided on this page.
Download Board manual (PDF file, 219kB)
Ships from: USA
Leadtime: In stock