Atmel 9G45, Linux-ready 128-pin System-on-Module on Baseboard

This is an evaluation kit featuring the M-9G45A Atmel AT91SAM9G45 ARM926 System-on-Module on a motherboard that provides most of the interfaces needed to experiment with the processor. The system comes with a Linux 2.6.38 OS installation.

M-9G45A is a credit-card-size system-on-module powered by the 400MHz Atmel AT91SAM9G45 ARM926 processor with 128MB DDR2 DRAM, 128MB NAND Flash and 2MB DataFlash. As well as the Linux 2.6.38 OS pre-installed in the Flash disk of the M-9G45A, many powerful utility programs are included. A GNU C/C++ tool chain is included on CD-ROM.

The M-9G45A connects to the main board using 2.0mm-pitch pin headers. You can remove the module from the baseboard and install it into your own custom system once you've finished your evaluation.

M-9G45A Evaluation Kit Interfaces

AT91SAM9G45 Evaluation Board Features

• LCD interface (TTL): 2x
• LCD interface (LVDS): 1x
• Backlight Controls: 2x, for 5V or 12V LCDs
• Touchscreen interface: 4-wire, resistive type
• Ethernet: 1x, 10/100Mbps
• TTY: 1x RS485 and 3x RS232
• USB Host: 4x, USB 2.0 compliant
• USB Client: 1x, USB 2.0 compliant
• GPIO: 15 pins, CMOS/TTL-level
• microSD socket: 1x
• Audio: 1x input and 1x output
• Status LEDs: for power, Ethernet and TTY ports
• Power input circuitry (9V to 30V DC)

AT91SAM9G45 Evaluation Board Resources

• M-9G45A-EV Evaluation Board Hardware Guide
• M-9G45A-EV Evaluation Board Schematic
• M-9G45A SoM Datasheet
• M-9G45A SoM User Guide
• Atmel AT91SAM9G45 Page with datasheet and other documentation