Power supply in DIN rail format for control cabinets This power supply unit takes mains power and converts it into usable power for devices on your DIN rail.
Two versions of the AK-DinRail-PS are available: 12V output or 24V output. Each provides 20W. Use the Version option selector at the bottom of this page to specify which version you want.
These power supplies are in top-hat rail format, specifically designed to match the AK-NORD DinRail series. It can be mounted on a 35mm top hat / DIN rail EN 60715 (50022). It has a width of only 35 mm.
The AK-DinRail-PS functionally is the same as the AK-RailPort-PS; it just has a different form. This DinRail series has a slim profile, putting the connections one behind the other to take up minimal rail space. The RailPort series has a more traditional profile, putting the connections side by side along the rail. Unlike the DinRail series, the RailPort series does not have a cover over the LEDs.
DIN Rail Power Supply Features
|Dimensions ||120 × 101 × 35 mm |
|Temperature range ||-40°C to +70°C @ 25% load |
|Certifications ||CE / WEEE / RoHS |
EN 55022 Class B
EN 55024 Class A
|Protection ||IP30 |
|Power Input ||2-pole screw terminal, 5.08mm |
115V to 230V AC, 385mA / 280mA
Frequency 47Hz to 440Hz
|Power Output ||3-pole screw terminal, 5.08mm |
12V or 24V DC (depending on version)
|Leakage Current ||Max. 0.75mA |
|Max. Capacitive Load ||800µF |
|Isolation Voltage ||Input to output = 3000V AC min. |
|Mounting ||35mm top hat / DIN rail |
DIN EN 60715 (50022)
|Storage Temperature ||-40°C to +85°C |
95% max. relative humidity
|Short-Circuit Protected |
Warning Working with mains voltages is extremely dangerous. Make sure you know what you are doing, have mains power turned off at the circuit breaker and are using wires of sufficient gauge when hooking up the mains. Ideally this unit should be installed by a certified electrician.
Lead time: 1 week