Operating Temperature: -40 to +85 °C Atmel SAMA5D34 Cortex-A5 CPU, 536 MHz 512MB DDR2 SDRAM, 256MB NAND Flash Gigabit Ethernet port TFT LCD interface with touchscreen support Audio In/Out, USB Device, 2x USB Host CAN, RS485, RS232 support IPC-SAMA5D34 is a high-performance industrial PC board using the Atmel SAMA5D34 ARM Cortex-A5 processor running at up to 536 MHz. The IPC-SAMA5D34 consists of a plug-in CPU board (CM-SAMA5D34) and one base board. You can replace the CPU module with the CM-SAMA5D36 if you want to develop on the SAMA5D36 CPU also (the D36 has less RAM, but adds a second Ethernet port, two more serial ports and another timer/counter). The CM-SAMA5D34 processor card has external 512MB DDR2 SDRAM, 256MB Nand Flash and 4MB SPI Flash. It integrates one 10/100/1000 MBit/s Ethernet chip and many peripherals. The IPC-SAMA5D34 base board comes with a variety of common standard interfaces, such as Gigabit Ethernet, USB Host, SD card, DB9 serial port, RS232/RS485 Serial port, CAN Bus interface, audio input and output ports, as well as some of the on-board testing devices such as buzzer, keypad, GPIO ports, etc. This system comes with Linux 3.6.9 installed. SAMA5D34 Development Board Features  - CPU board with Atmel SAMA5D34 ARM Cortex-A5 processor, 536 MHz
- 512MB DDR2 RAM, 32-bit data bus
- 256MB Nand Flash
- 4MB SPI Flash
- Two LEDs (on CPU board)
- One Gigabit Ethernet port, RJ45 interface
- Five Serial Ports:
• Debug Serial: RS232 level, DB9 connector
• USART0: RS485 level, 3.81mm screw terminal connector
• USART1: TTL level, 5-wire, 2×5-pin header
• USART2: RS232 level, 3.81mm screw terminal connector
• USART3: TTL level, 5-wire, 2×5-pin header - CAN Bus 2.0
- Two USB Host interfaces
- USB Device interface (mini-B)
- Audio In/Out interfaces (3.5mm jacks)
- microSD TF card interface
- Three buttons: one Reset key and two User keys
- RTC battery holder (battery not included)
- LCD interface header
- 16-pin (2×8) GPIO interface
- PCB Dimensions: 145 × 110 mm, 2 layer
- Power Input: 12V
- Operating System: Linux 3.6.9
Note: The ENET 100M and UART0 MODEM interfaces shown on the board are not usable by the SAMA5D34 CPU. They are there in case you swap the CPU board for the CM-SAMA5D36. SAMA5D34 Development Board Software | U-Boot | Supports system update via USB drive
Supports system update via Ethernet | | Version | Linux 3.6.9 | | Drivers | CAN | Supports CAN Bus | | Serial | Supports serial port send/receive, RS232 and RS485 modes | | RS485 | Supports Modbus | | Display | Supports 4.3" or 7" LCD with touchscreen | | Backlight | LCD backlight | | Audio | Supports audio in/out | | USB Host | Supports USB drive, USB mouse, USB keyboard | | Gigabit Ethernet | Supports 1000Mbps Ethernet, TCP/IP | | TF Card | Supports microSD card up to 32GB | | GPIO | GPIO in/out driver | | Buzzer | Buzzer driver | | Key | Keypad driver | | System Functions | RTC, Watchdog | | File System | UBI file system | SAMA5D34 Development System Package Contents - IPC-SAMA5D34 Base Board
- CM-SAMA5D34 CPU Board
- Ethernet cable
- Serial cable
- USB cable
- 12V @ 2A power adapter
- DVD with system image
You can add an optional 4.3-inch or 7-inch LCD touchscreen to your order using the selector below. Use the checkboxes below that to add an extra CM-SAMA5D34 CPU module and/or a CM-SAMA5D36 CPU module. SAMA5D34 Development System Resources Ships from: China
Lead time: 1 week
Available Options:
| LCD Display: |
|
|
