MicroController Pros Home Page My Account  Cart Contents  Checkout  
  Store » EDM6070 My Account  |  Cart Contents  |  Checkout   
Quick Find
Enter keywords to find the product you are looking for in the Quick Find field above

or use
Advanced Search
Accessory Boards->
ADI Blackfin
Atmel AVR->
Cypress PSoC
Microchip PIC->
Silicon Labs
ST Microelectronics->
Texas Instruments->
Embedded Ethernet->
Embedded Software->
I/O Modules->
Parts & Components->
Pick & Place Tools
Programmable Logic (PLD)
Prototype PCBs->
ROM/Flash Emulators
Test & Measurement->
Tutorial Software
Universal Programmers->
Intro to Embedded Tools
Embedded News Digest
Useful Resources
Shipping & Returns
Warranty & Liability
Privacy Notice
Conditions of Use
Contact Us
AT91SAM9X35 Board, 7" LCD TS, USB, Ethernet, SD, CAN, Linux US$199.00

AT91SAM9X35 Board, 7\" LCD TS, USB, Ethernet, SD, CAN, Linux

The EDM6070AR-01 Embedded Display Module is not simply an HMI; it is more flexible and more customizable. This is a stable and reliable Linux system with an Atmel AT91SAM9X35 ARM926EJ-S 32-bit processor. It consists of three parts: a Mini6935 CPU core module, a motherboard, and a 7-inch TFT LCD (800480) with resistive touch screen.

The motherboard provides RS232, USB, microSD, Ethernet, RS485, CAN, GPIO, and audio output interfaces, as well as terminals for 5V power output. The system is powered by 12V (1.25A) which you must provide via Phoenix connector. It is built to CE, FCC and CCC design standards.

A Linux BSP software package is included with device drivers and example applications to test the various on-board peripherals.

EDM6070AR-01 Board Interfaces and Layout

Embedded Display Module Features

  • 7-inch TFT LCD with PWM backlight control, 800480 resolution, 16-bit RGB565 color mode, 0.0642 0.1790 mm dot pitch, 154.08 85.95 mm active area, 4-wire resistive touch screen
  • AT91SAM9X35 ARM926EJ-S 32-bit microcontroller, running at up to 400MHz, with internal 16KB Data Cache, 16KB Instruction Cache, Memory Management Unit, 64KB ROM and 32KB SRAM
  • CPU Module Board adds 128MB DDR2 SDRAM, 256MB Nand Flash, and 4MB Data Flash
  • UART2 three-wire serial interface, RS232 level, via Phoenix connector
  • RS485 interface via Phoenix connector
  • CAN interface via Phoenix connector
  • DEBUG interface via Phoenix connector
  • Three input and four output interfaces via Phoenix connectors
  • USB2.0 Device (High-speed, 480Mbps) and USB2.0 Host (Full-speed, 12Mbps) interfaces
  • 10/100Mbps Ethernet MAC, using DM9161CIEP chip/li>
  • TF card slot (microSD)
  • 3.5mm audio output jack, using WM8731EDS chip
  • High-precision RTC (battery holder provided; battery is not included)
  • Watchdog timer
  • Buzzer
  • User input button and reset button
  • LED I/O indicator and two LED power indicators
  • 5V power output interface via Phoenix connector
  • Operating temperature: -10 to +70 C
  • Storage temperature: -20 to +85 C
  • Operating humidity: 0% to 90% non-condensing
  • Power supply: DC 12V via Phoenix connector; 1.25A typical
  • Electrical standards: CE, FCC, CCC
  • PCB dimensions: 181 120 mm

Software Features

Type Name Description
BIOS Bootstrap Serial Flash
U-boot Serial Flash
Supports kernel and file system programming via SAM-BA or USB Flash drive (Flash drive recommended)
Kernel Linux 2.6.39 ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/YAFFS2/UBIFS file systems
Serial Debugging and COM2 serial interface on CPU
RTC Internal real-time clock of AT91SAM9X35
Net 10/100Mbps Ethernet driver
Flash NAND Flash and DataFlash driver
LCD LCD driver supporting 800480 resolution
Touch Screen Touchscreen controller on CPU
USB Host USB Host driver
Watchdog Built-in watchdog driver
SD Card SD Card driver
CAN Bus CAN bus driver
RS-485 RS485 bus driver
LED System status LED
BEEP Buzzer driver
Audio WM8731EDS audio output driver
Button User button driver
GPIO GPIO driver: 3 input channels, 4 output channels
File System
UBIFS Readable and writeable file system supporting compression storage

In addition, the following example applications are included: UART Test, Event Devices Test, GPIO Test, LED Test, Buzzer Test, CAN Test, CAN Receiver, CAN Transmitter.

Package Contents

By default the package comes with the EDM6070AR-01 board (motherboard, Mini6935 CPU module, and LCD touchscreen module), CD-ROM (user manual, source code, development tools, etc.), and a set of four hexagonal screws and nuts for mounting (the picture to the right shows the screws/nuts installed on the similar EDM1070 board).

Using the option selector below, you can choose to get the board without the LCD touchscreen. The part number on your invoice will change based on whether you order the board with LCD (T6010264) or without LCD (T6010263).

  • Download EDM6070 Board Mechanical Dimensions (diagram is a mirror image of the bottom side of the board, so the dimensions are shown as though you're actually looking at the LCD side)
  • See the Atmel AT91SAM9X35 Page for datasheets and other documentation about the CPU
  • Ships from: China
    Lead time: 1 week

    Available Options:
    LCD Display:

    This product was added to our catalog on Wednesday 11 September, 2013.


    Shopping Cart more
    0 items
    What's New? more
    Electricity, Magnetism and Materials Solution Educational Kit
    Electricity, Magnetism and Materials Solution Educational Kit
    Specials more
    AT91SAM9263 (ARM9) CPU Module V1.3, 64MB RAM, 262MB Flash
    AT91SAM9263 (ARM9) CPU Module V1.3, 64MB RAM, 262MB Flash
    Tell A Friend

    Tell someone you know about this product.
    Notifications more
    NotificationsNotify me of updates to AT91SAM9X35 Board, 7" LCD TS, USB, Ethernet, SD, CAN, Linux
    Reviews more
    Write ReviewWrite a review on this product!
      Wednesday 23 January, 2019   List of all our Products

    Copyright © 2003-2017 MicroController Pros LLC
    Powered by osCommerce