This is a bundle of two 204-0006-01 adapter PCB strips and the 920-0031-01 solderless breadboard.
Each PCB is a strip of three SOIC-to-DIP adapters with a twist. These have the patented Schmartboard|ez technology to make soldering surface-mount devices easy. Your SMT part will sit in grooves that hold it in place and already have solder in them. So all you need to do is put a chip in the grooves, apply flux, and use a small enough soldering tip.
The adapters ship as two PCBs that can be snapped apart easily, creating six individual boards in total:
The 20- and 28-pin boards also include room for 0805 SMT components (e.g. a bypass capacitor) and pads for easy access to ground.
- Qty 2 boards for 8-pin SOIC at 0.65mm pitch
- Qty 2 boards for 20-pin SOIC, 0.65mm pitch
- Qty 2 boards for 28-pin SOIC at 0.65mm pitch
Two strips of 40 male pin headers are included. These strips also can be snapped apart so that you can create the individual segments needed when these boards have been separated. This strip does not provide enough pins for all three boards (or even for the two larger boards). You can order additional pin headers using the option box at the bottom of this page.
The Bred Blox solderless breadboard has 830 tie points (126 five-point terminals plus four horizontal bus lines of 50 test points each for easy connections to common lines). The board has interlocking features so that you can connect multiple Bred Blox together to make a larger prototyping area.
Optional Recommended Products for this Item