The mikromedia for dsPIC33EP is a compact development system with lots of on-board peripherals which allow development of hand-held devices with multimedia content. The central part of the system is the 16-bit Microchip dsPIC33EP512MU810 microcontroller. The mikromedia for dsPIC33EP features integrated modules such as stereo MP3 codec, TFT 320×240 touch screen display, accelerometer, USB connector, audio connector, MMC/SD card slot, 8 Mbit Flash memory, and more. The board features a front-facing reset button, battery charger circuit for Li-Polymer batteries, crystal oscillator, and connection pads for all other available pins.
A color user manual is included, and code examples are available to download. The board comes pre-programmed with a USB bootloader, so you won't have to spend a penny more on external programmers. If you do want to, pins pads are available for using a mikroProg for PIC or ICD2/3 (with adapter).
The board measures 81.2 × 60.5 mm (3.19 × 2.38 inches). All unused microcontroller pins are available via pads along the sides of the board. These allow you to add on mikromedia shields (see options below), or to add this board to the mikromedia WorkStation.
dsPIC33EP Multimedia Board Features
dsPIC33EP512MU810 microcontroller This high-performance 16-bit microcontroller with its integrated modules in combination with the on-board modules is ideal for multimedia applications.
- Up to 70 MIPS operation
- 512 KB of program memory, 24 KB of auxiliary Flash
- 53248 Bytes of RAM
- 83 I/O pins
- CPU operating voltage 3V to 3.6V
- Internal oscillator 7.37 MHz, 32 kHz, RTCC
- nanoWatt features: Fast Wake / Fast Control
- 4x UART, 4x SPI, 2x I2C, 2x CAN, USB 2.0 OTG
- ADC, DAC, etc.
- Max. I2C speed 400 kHz
USB power supply You can apply power to the board using the provided Mini-B USB cable. On-board voltage regulators will provide the appropriate voltage levels to each part of the board. The Power LED will indicate the presence of power supply.
Battery power supply You can also power the board using a Li-Polymer battery via the on-board battery connector. An MCP73832 battery charger circuit enables you to charge the battery over USB connection. A red LED indicates when the battery is charging. Charging current is ~250mA and charging voltage is 4.2V DC.
Programming with bootloader For programming the microcontroller, you can use a bootloader program which is pre-installed in the MCU memory. To transfer a .hex file from a PC to the MCU, you can use the free mikroBootloader application. The board has a mini-USB connector and ships with a cable to connect to your PC.
Programming with external programmer/debugger In case you want to remove the USB bootloader, need to re-install it, or want to perform in-circuit debugging, the microcontroller can be programmed with an external in-circuit programmer/debugger (not included). The board has pads for installing programming headers compatible with the mikroProg for PIC or the ICD2 Connector Board.
Reset Button The board is equipped with a reset button on the LCD side so it can be available to the user if the mikromedia board is placed in an enclosure. The other side of the board has pads for installing a second reset button if needed.
Crystal Oscillator The board is equipped with an 8 MHz crystal oscillator circuit that provides an external clock waveform to the microcontroller's CLKO and CLKI pins. This base frequency is suitable for further clock multipliers and ideal for generation of the necessary USB clock, which ensures proper operation of the bootloader and your custom USB-based applications. The board also contains a 32.768 kHz crystal oscillator which provides external clock for the internal RTCC module.
microSD Card Slot The board contains a microSD card slot for using microSD cards in your projects. It enables you to store large amounts of data externally, thus saving microcontroller memory. microSD cards use Serial Peripheral Interface (SPI) for communication with the microcontroller. Max. microSD SPI speed is 35 MHz.
LCD with Touch Screen The development system features a TFT 320×240 display covered with a resistive touch panel. Together they form a functional unit called a touch screen. It enables data to be entered and displayed at the same time. Current consumption with backlight on is 56.2 mA (backlight consumption is 42 mA). The TFT display is capable of showing data in 262,144 different colors. A stylus is sold separately; see the options below.
Audio Module mikromedia for dsPIC33EP features a VS1053 audio controller. This module enables audio reproduction by using stereo headphones connected to the system via the 3.5mm connector CN2. All functions of this module are controlled by the microcontroller over Serial Peripheral Interface (SPI). Max. audio codec SPI speed is 2.1 MHz.
USB Connection The dsPIC33EP512MU810 has an integrated USB module which enables you to implement USB communication functionality to the mikromedia board. Connection to a target USB host is achieved with a Mini-B USB connector.
Accelerometer The on-board ADXL345 accelerometer can be used to measure acceleration in three axes: x, y, and z. The accelerometer's function is defined by the program loaded into the microcontroller. Communication between the accelerometer and the microcontroller is performed via the I2C interface. You can set the accelerometer address to 0 or 1 by re-soldering the SMD jumper (zero-ohm resistor) to the appropriate position. This jumper is placed in address 1 position by default.
Flash Memory The M25P80 Flash memory module enables the microcontroller to use an additional 8Mbits of Flash memory. It is connected to the microcontroller via the Serial Peripheral Interface (SPI). Max. serial Flash SPI speed is 35 MHz.
Software Examples The code example ZIP file that you can download below contains the following example software, both as ready-to-load compiled code and as source code written in mikroC, mikroBASIC and mikroPascal. The source codes provide detailed explanatory comments.
- Demonstration of ADXL345 three-axis accelerometer. Values from accelerometer are shown on the TFT display.
- Demonstration of microSD card slot and MMC FAT16 library.
- Demonstration of MIO283QT2 LCD with Touch Panel. Creates a simple calculator.
- Demonstration of communicating with VS1053 codec. Reads MP3 file from MMC and sends it to VS1053E for decoding and playback.
- Demonstration of USB module. Creates USB HID communication, and echoes back any message sent to it.
- Demonstration of M25P80 Serial Flash. Connects via SPI, writes a byte and an array of bytes, then reads them back.
- mikromedia for dsPIC33EP Board with touchscreen LCD
- USB cable
- Printed documentation
dsPIC33EP Multimedia Board Resources
Optional Recommended Products for this Item