The M574 oscilloscope is a reliable device capable of performing all standard measurements — even those which require long memory. Its 1MS memory per channel enables you to perform detailed analysis of fast, long processes such as digital communication.
The device has a metal casing which can withstand rough manipulation and is fully recyclable.
The M574 offers precise electronic engineering and automated calibration processes during manufacturing. Each kit contains a traceable calibration certificate. The inputs withstand ±200V, which is quite rare in this category.
The used memory size is configurable. This allows you to switch easily between high update rates (short memory) and high data amounts (large memory). Since the M574 device uses USB 2.0 for communication (with automatic fallback to USB 1.1), it provides you with high refresh rates comparable to stand-alone devices.
Software The basic package contains complex yet easy-to-use oscilloscope software (Scope). Scope allows you to control the oscilloscope, use advanced functions (such as FFT, persistent display mode, mask testing) or export the data. The Spectrum Analyzer software is the part of the basic package as well.
This kit also includes a license for Roll Mode software, which allows you to acquire data as fast as 5MS/s and store them directly to the hard drive. You can use either the viewer to analyze the data, or export tools to analyze data in third-party applications.
Support ETC provides unlimited tech support, and software updates also are free of charge always.
150MHz Digital Storage Oscilloscope Kit Contents
- M574/RM 150MHz digital storage oscilloscope with Roll Mode
- USB 2.0 cable, 1.8m
- Two 200MHz/1:1:10 oscilloscope probes, 1.2m
- CD-ROM with software and user's guide
- Quick Start Guide, Warning leaflets, Calibration certificate, and Certificate of conformance
M574 Oscilloscope Specifications
|Vertical deflection system |
|No. of divisions ||8 |
|No. of pixels per division ||32 |
|Deflection factor range ||10mV/div to 5V/div in 1-2-5 sequence |
|Accuracy ||±2% of current value + 1 pixel |
|Resolution ||8 bits (0.39%) |
|Frequency response (-3dB) ||DC 0-150 MHz, AC 1.2 Hz to 150 MHz |
|Step response rise time ||max. 2.4 ns |
|Channel isolation ||min. –60 dB |
|Resistance ||1 MΩ +5%, -2% |
|Input resistance inaccuracy adjustment ||Digital for absolute accuracy ±2% of current voltage + 1 pixel |
|Capacitance ||30 pF ±2 pF |
|Zero setting accuracy ||±2% of the screen |
|Maximum input voltage ||±200V at 100 kHz or less |
|System type ||Dual level |
|Trigger source for primary level ||Selectable Channel A, Channel B or external trigger input |
|Trigger source for secondary level ||Selectable Channel A, Channel B or external trigger input |
|Threshold setting ||Channel A and Channel B on the whole display range. External fixed on about 1.5V |
|Slope selection ||Leading or trailing edge independently on each source |
|Minimum trigger pulse period ||5 ns |
|Minimum trigger pulse length ||2.5 ns |
|Maximum voltage on external trigger input ||–10V to +13V at 20 kHz or less |
|Adjustments ||Digital filter with valid pulse length settable up to 131072*Ts for each level and counter of valid triggering events settable from 1 to 32768 for each level. HOLD-OFF settable up to 1048576*Ts with selectable AUTO mode, to sample proper amount of data before trigger. (Ts – actual real-time sampling period.) |
|Data acquisition system |
|No. of divisions ||10 |
|No. of pixels per division ||50 |
|Mode of operation ||Sampling before and after trigger with continual selection of the trigger position |
|Record length ||Settable from 1024 to 1048576 (1M) samples for each channel |
|Time base range in 1:1 mode ||5 ns/d to 100 ms/d in 1-2-5 sequence |
|Time base range using different ZOOM modes ||625 ps/d to 204.8 s/d |
|Time base accuracy ||0.01% to 100ns/d, 0.5% for 50ns/d to 5ns/d |
|Real-time sampling frequency ||1 kHz to 100 MHz |
|Equivalent sampling frequency ||1 kHz to 10 GHz |
|Display range with respect to trigger event ||1048576 samples before and 1048576 samples after trig. event in length of 1048576 samples |
|Probe compensation generator |
|Output connector ||BNC, together with External trigger input |
|Output impedance ||1kΩ to parallel with 10nF and approx. 50Ω serial |
|Output waveform ||Pulse with 1:1 duty cycle |
|Frequency ||1465 Hz |
|Output voltage (no load) ||3.3V ±5% |
|Power source ||USB interface via USB cable |
|Max. current ||USB1.1: 350 mA, USB2.0: 450 mA |
|Mechanical characteristics |
|Dimensions without feet and connectors ||165 × 111 × 35 mm |
|Dimensions with feet and connectors ||182 × 111 × 39 mm |
|Weight ||520 g |
150MHz Digital Storage Oscilloscope Kit Documentation
Optional Development API The Development Kit is an API allowing you to add control functions for the scope in your own software applications. It works in Windows 98SE, Me, 2000, XP and Vista. It comes with descriptions and examples of all libraries written in Inprise Delphi, Inprise C++ Builder, Visual C++ 6.0, Visual Basic 6.0, C# .NET and Visual Basic .NET.
Country of Origin: Slovak Republic Lead time: 1 week
Optional Recommended Products for this Item