
Eddy-S4M Development Kit with AT91SAM9G20 (ARM9) CPU Module, Ethernet, 2x USB Host, 1x USB Device, 2x RS232, 2x RS422/485 and SD Card Holder Eddy-S4M Development Kit The Eddy-S4MV2.5 Development Kit provides an easy testing and evaluation environment for Eddy applications. The development kit provides regulated power to the Eddy-S4M CPU module and provides easy access to all on-board interfaces (2x RS232, 2x RS422/585, Ethernet, 2x USB Host, 1x USB Device, SD Card) via physical connectors. An on-board 2x10 JTAG connector allows for in-circuit debugging and programming, a 2x22 pin male header and two 2x23-pin female headers provide easy test access to all Eddy-S4M CPU module signals. Note: The picture on the right shows the development kit without the Eddy-S4MV2.5 mini-PCI CPU Module mounted, but a CPU module is included with the kit. Eddy-S4M Development Kit Highlights - Eddy-S4M mini-PCI CPU Module:
- Mini-PCI form factor, 122 contacts
- 400MHz ARM9 CPU with 8MB DataFlash and 32MB SDRAM
- 10/100Base-T Ethernet with Auto MDI/MDIX
- 2x USB 2.0 Full Speed (12Mbps) Host
- 1x USB 2.0 Full Speed (12Mbps) Device
- MicroSD Card Holder (max 16GB, SDHC Support)
- 4x UARTs
- Watchdog Timer & Real Time Clock with Backup-Battery(CR1220) Holder
- Max 34 Programmable General Purpose I/Os
- Embedded Linux with TFTP, FTP and Web servers, manageable via Web, SNMP and PortView Utility
- Easy to use Eclipse based IDE LemonIDE
- LemonIDE, Eclipse-based IDE included
- All-in-one visual source code editor, C/C++ compiler & debugger
- SDK including API & Source codes
- Easy-to-use Windows Utilities: COM Port Redirector for Automatic Serial to Ethernet conversions, PortView for monitoring I/O data and status and TestView for evaluating communication performance & stability
Eclipse based IDE, LemonIDE Support LemonIDE is an integrated develop environment, built on the open-source Eclipse framework. It includes GNU C/C++ Compiler, a Source Code Editor and Debugger. LemonIDE provides an easy & effective GUI (Graphical User Interface) for Application and Firmware Developments that run on SystemBase's embedded real-time Linux, Lemonix SDK, API & Source Code Support Eddy can upload and execute customized user applications. To enable you to program your own socket/serial communication applications with the least amount of time and effort, SystemBase provides arrays of development support including an SDK (Software Development Kit), API (Application Programming Interface) and Source Code. Windows Utility Support Utilities to monitor and test your finalized products over network and serial interfaces are provided at no cost. The SystemBase management utilities, COM port redirector, PortView and TestView utilities allow you to monitor and administer your application. Eddy-S4M Specifications Hardware | | Serial Port | 2x RS232 DB9 Male 2x RS422/485 5pin Terminal Block (S/W Selectable & with Auto toggle) | SD Card Holder | Push Type, Up to 16 GB MMC/SD Card/MC supported | ADC Interface | On-Board Light Sensor | USB Connector | 1x Device 2x Host | Ethernet Connector | RJ45 | Serial Debug Port | DB9 Male | DIP Switches | Power ON/OFF RS422/485 Termination resistor GPIO input test (Off : Low, ON : High) | LEDs | Power, Ready, 34 Programmable IO, Console & Serial TxD and RxD | JTAG Port | 2x10 pin 0.1" | Reset Button | Factory Default & Warm Boot | Expansion/Test Headers | Two 2x23 Female headers, 0.1" provide access to CPU Module signals for expansion and testing One 2x22pin Male Header, 0.1" provides access to CPU Module GPIO pins | Input Power | 5VDC | Dimensions | 160 x 120 mm | Package Contents - Eddy-S4M v2.5 Module
- Eddy-S4M Baseboard
- SDK, IDE, Compiler, Utility Software & Documentation on CD
- LAN Cable, Serial Cable, Jumper, 5V DC Power Supply
Development Kit Resources
|