The LPC-P2919 allows you to explore the features of the LPC29xx family on a budget. It has everything necessarily to build simple applications: reset and oscillator circuits, JTAG port for programming/debugging, CAN, LIN, RS232, SD/MMC, LCD, three status LEDs and two user buttons. There are plenty of GPIOs on extension headers to which you can connect additional circuits.

LPC2919 Prototype Board Features

• 32-bit LPC2919FBD144 MCU combining an ARM968E-S CPU core with two integrated TCM blocks operating at frequencies of up to 125 MHz, CAN and LIN, 56 kB SRAM, 768 kB Flash memory, external memory interface, two 10-bit ADCs, and multiple serial and parallel interfaces in a single chip.
• Standard ARM JTAG connector 2x10-pin layout for programming/debugging
• RS232 port
• Two CAN drivers and connectors
• Two LIN drivers and connectors
• 8-character, 1-line LCD
• SD/MMC card connector
• Two user buttons

• Trimpot connected to ADC
• RESET circuit and button
• Three status LEDs
• Power supply LED
• Jumper for Power Selection mode
• Three on-board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
• Single power supply: External power supply +9V DC required, or takes power from JTAG connector
• 16 MHz crystal oscillator
• UEXT connector with SPI, RS232 and power supply for connecting add-on modules (see below)
• Extension port connector for many microcontroller pins
• Prototype area
• PCB: FR-4, 1.5 mm (0.062"), red soldermask, silkscreen component print
• Dimensions: 140 x 89 mm (5.512 x 3.504")

Add-on UEXT Modules Available

LPC2919 Prototype Board Resources

• User Guide with schematics and pinouts
• Buttons and LCD example code for EW-ARM 5.40
• Potentiometer, UART, and LCD example code for EW-ARM 5.40
• SD/MMC card example code for EW-ARM 5.40