This board has a minimum order quantity of 50 pieces and a 4-week lead time. The price you see listed on this page is the volume price per unit for a 50pcs order. The STM103V100 is an evaluation board for STMicroelectronics' ARM Cortex-M3 core-based STM32F103VBT6 microcontroller. The device has a complete range of peripherals including full speed USB2.0, CAN2.0A/B compliant interface, two I2C channels, two SPI channels, three USART channels with smartcard support, internal 20KB SRAM and 128KB Flash, JTAG, SWD and uLinkMe debugging, motor control connector, SD card socket, etc. The board is provided with plenty of software examples, which can be used in popular Keil MDK environment. STM32F103VBT6 Development Board Features - Dimensions: 172mm x 114mm
- Processor: STM32F103VBT6, compatible with STM32F103V8T6 (100 pins), STM32F103RBT6, STM32F103R8T6, STM32F103C8T6, STM32F103C6T6
- 8Mbyte serial Flash
- RTC with backup battery
- Three Power supply options: 5V DC power supply, USB power supply, led out Pin strip
- USB device (USB2.0)
- CAN2.0 interface
- Two RS232 serial ports (one supports RTS/CTS function)
- IrDA transceiver
- LCD interface with 16x2 Character LCD
- SD card socket
- Smart card socket (on the rear of the board)
- One Motor control connector
- One extended temperature sensor
- Audio play/record
- Two debug interfaces options: 10-pin SWD or 20-pin JTAG
- Four buttons (Wakeup, Reset, Tamper and User)
- Four LEDs
- Joystick with 4-direction control and selector
STM103V100 Functional Block Diagram
Plenty of software examples for this STM103V100 evaluation board are provided, all in source code. These software examples can be debugged under the popular Keil MDK environments. The structure of the directories is as below: | Directory | Content | | MDK | All source codes under MDK environment | | Basic examples | | | USART | Communicate with PC though the terminal | | FLASH | Read and write internal flash | | DMA | Transfer data from FLASH to RAM in DMA mode | | CAN | Communicate with CAN in loopback mode | | SYSTICK | Configure the SysTick to generate a time base equal to 1ms | | DEBUG | Demonstrate the STM32F10x Firmware Library in DEBUG mode | | ADC | Use ADC and DMA to transfer converted data from ADC to a data buffer continuously | | GPIO | Configure GPIOs | | EXTI | Configure an external interrupt line | | RCC | The way to configure the system clock source | | RTC | How to use the RTC peripheral | | WWDG | The way to update at regulated period, the WWDG counter using the Early Wakeup interrupt | | BKP | Write/read data to/from data backup registers | | TIM | Output different frequencies though four channels | | TIM1 | Configure TIM1 peripheral to generate 7 PWM signals with 4 different duty cycles | | NVIC | The use of the Nested Vectored Interrupt Controller | | SPI | Communicate with an M25P64 FLASH with SPI | | IWDG | Refresh IWDG counter using the SysTick interrupt | | IrDA | Transmit Transmit data sent by joystick through IrDA | | IrDA_Receive | Receive data sent by IrDA | | PWR | The system power control | | LCD_1620 | Print char in 16*2 LCD | | LCD_SPI_char | Print char in 240*320 LCD with SPI | | LCD_SPI_picture | Print picture in 240*320 LCD with SPI | | SD_card | Communicate with external SD card | | Cortex-M3 | The example of CortexM3 Bit-Band | | Tsensor | Communicate with Temperature sensor IC | | USB (Audio_Speaker) | Provide audio device drive with USB | | USB (JoystickMouse) | Control the mouse with five direction keys on board | | USB (Mass_Storage) | Communicate with SD card though USB | | USB (Device_Firmware_Upgrade) | Provide device driver to communicate with PC | STM32F103VBT6 ARM Cortex-M3 Board Package Contents - STM32F103V100 ARM-CM3 Board
- RS-232 Serial Cable / DB9 F-M
- USB Cable / A-B, to supply power to the board or for downloading and programming
  
Download Ships from: China
Lead time: 4 weeks
|
