PLCC44 socket adapter for Wellon programmers Converts from a 40-pin DIL ZIF socket to PLCC44 (1.27mm pitch 11x11) (IC120-0444-306). Can be used with all Wellon programmers.
Some adapters bear the older part number WL-PL44-P4 on their silkscreen, as seen in the photo.
Note: Check your programmer's Supported Devices List to make sure your device can be used with this adapter. There is another PLCC44 adapter that may be required, which uses a 48-pin DIP configuration; see WL-PL44-U001. Also make sure that you select the correct adapter in the programming software.